{"title":"ART","description":"\u003cp\u003eShop ART Pro Audio (Applied Research and Technology) at SixStarPSL: tube preamps, USB audio interfaces, direct boxes, headphone amps, mic splitters, power conditioners, EQs and installation amplifiers.\u003c\/p\u003e","products":[{"product_id":"art-pro-mpa-iii-prompaiii","title":"ART Pro MPA III, 2 Channel Tube Microphone Preamp with Variable Impedance","description":"\u003ch2\u003eART Pro MPA III 2 Channel Tube Microphone Preamp with Variable Impedance\u003c\/h2\u003e\u003cp\u003eThe Pro MPA III is a versatile two channel preamp with streamlined controls and real tube tone in a 2U rackmount enclosure.\u003c\/p\u003e\u003cp\u003ePacked with essential features, it can be a powerful upgrade to the built in preamps on your mixer or audio interface. Each channel can accept an XLR microphone or 1\/4\" instrument signal, and offers variable controls for input gain, low cut filter, impedance, and output level. There are also switches for a 20 dB boost, phase invert, and 48-volt phantom power.\u003c\/p\u003e\u003cp\u003eNew in version III, the Voice switch lets you select a warm tube or clean solid state signal path. The Character switch enhances low and high frequencies to compensate for the non linearity of microphone transformers and improve vocal intelligibility. The variable impedance range has been significantly increased for even greater flexibility, providing a powerful creative tool when using dynamic and ribbon microphones.\u003c\/p\u003e\u003cp\u003eThe Pro MPA III also features balanced XLR and 1\/4\" outputs, selectable +4 dBu and -10 dBV operation, and a universal internal power supply. Like the Pro Channel III channel strip and Pro VLA III compressor, the Pro MPA III is an affordable, robust solution that brings classic analog processing and tube warmth to the modern studio.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDiscrete Class A FET Microphone Preamps\u003c\/li\u003e\n\u003cli\u003eSelectable 12AT7 Tube or Solid State Voicing\u003c\/li\u003e\n\u003cli\u003eVariable Microphone Impedance and Low Cut Filter\u003c\/li\u003e\n\u003cli\u003eCharacter Switch to Enhance Vocal Intelligibility\u003c\/li\u003e\n\u003cli\u003eInstrument Level DI Inputs\u003c\/li\u003e\n\u003cli\u003eAnalog VU Meters\u003c\/li\u003e\n\u003cli\u003e+4 dBu or -10 dBV Operation\u003c\/li\u003e\n\u003cli\u003eUniversal Internal Power Supply\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eInput Impedance: 600Ω - 80 kΩ (XLR)\u003c\/li\u003e\n\u003cli\u003e1 MΩ (1\/4\")\u003c\/li\u003e\n\u003cli\u003eOutput Impedance: \u0026lt;47Ω (XLR)\u003c\/li\u003e\n\u003cli\u003eMaximum Input Level: +19 dBu (XLR)\u003c\/li\u003e\n\u003cli\u003e+17 dBu (Instrument)\u003c\/li\u003e\n\u003cli\u003eMaximum Output Level: +27 dBu (XLR, 1\/4\")\u003c\/li\u003e\n\u003cli\u003eMaximum Gain: 70 dB\u003c\/li\u003e\n\u003cli\u003eFrequency Response: 15 Hz - 48 kHz (+0, -1 dB, Tube)\u003c\/li\u003e\n\u003cli\u003e15 Hz - 120 kHz (+0, -1 dB, Solid State)\u003c\/li\u003e\n\u003cli\u003eTotal Harmonic Distortion: \u0026lt;0.005% (typical)\u003c\/li\u003e\n\u003cli\u003eEquivalent Input Noise: -128 dBu (XLR, A Weighted)\u003c\/li\u003e\n\u003cli\u003eCMRR: \u0026gt;50 dB\u003c\/li\u003e\n\u003cli\u003ePower Requirements: 100-240V~ 50\/60Hz 25W\u003c\/li\u003e\n\u003cli\u003eRear Mounted IEC Connector\u003c\/li\u003e\n\u003cli\u003eDimensions: 3.5\" x 19\" x 8.75\"\u003c\/li\u003e\n\u003cli\u003e8.9 cm x 48.3 cm x 22.2 cm\u003c\/li\u003e\n\u003cli\u003eWeight: 10.5 lbs \/ 4.7 kg\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eShop the ART Pro MPA III and more ART Pro Audio gear at SixStarPSL.\u003c\/p\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":67676703228178,"sku":"PROMPAIII","price":519.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0379\/2529\/0029\/files\/lg_prompaIII-front.jpg?v=1794425794"},{"product_id":"art-solo-mpa-solompa","title":"ART Solo MPA, Single Channel Tube Microphone Preamp, 1U","description":"\u003ch2\u003eART Solo MPA Single Channel Tube Microphone Preamp, 1U\u003c\/h2\u003e\u003cp\u003eThe ART Solo Series is a range of highly affordable, all analog, single channel processors. They offer flexible tone shaping with intuitive controls and the unmistakable sound of real tubes.\u003c\/p\u003e\u003cp\u003eThe Solo MPA is a multivoice mic preamp that offers both a clean solid state and warm tube signal path. The Voice knob lets you combine the two for the perfect blend of clarity and character.\u003c\/p\u003e\u003cp\u003eBalance lows and highs with the Tilt EQ, and use the sweepable Low Cut filter to eliminate rumble and tighten bass. The variable microphone impedance lets you tailor the preamp response to your mic for additional tonal options.\u003c\/p\u003e\u003cp\u003eIt also features a 20 dB boost, phase reversal, and phantom power, with controls for input and output gain and a VU meter for visibility. The rear panel has XLR and 1\/4\" connections, and the front panel has a 1\/4\" High Z input so you can use the Solo MPA as an instrument DI.\u003c\/p\u003e\u003cp\u003eExpand your recording setup with a versatile character preamp that offers the best of both worlds: clean, saturated, and everything in between.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAdjustable input impedance (600 to 80K ohms)\u003c\/li\u003e\n\u003cli\u003eFlexible Tilt EQ\u003c\/li\u003e\n\u003cli\u003eHand selected 12AX7 Tube\u003c\/li\u003e\n\u003cli\u003eTunable Lowcut Filter\u003c\/li\u003e\n\u003cli\u003eVariable Voice Tube\/Solid State Control\u003c\/li\u003e\n\u003cli\u003eFront accessible meter trim\u003c\/li\u003e\n\u003cli\u003eDiscrete class A FET input microphone preamplifier\u003c\/li\u003e\n\u003cli\u003eLow THD\u003c\/li\u003e\n\u003cli\u003eWide frequency response\u003c\/li\u003e\n\u003cli\u003eFront mounted Instrument\/DI Input\u003c\/li\u003e\n\u003cli\u003eVery high input impedance\u003c\/li\u003e\n\u003cli\u003e+4dBu\/-10dBV output level selection\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eInput Impedance 600-80KΩ adjustable (XLR), \u0026gt;800kΩ (Instrument), +27dBu (XLR)\u003c\/li\u003e\n\u003cli\u003eOutput Impedance \u0026lt; 47Ω (XLR)\u003c\/li\u003e\n\u003cli\u003eMaximum Input Level +19dBu (XLR)\u003c\/li\u003e\n\u003cli\u003eMaximum Gain 75dB\u003c\/li\u003e\n\u003cli\u003eFrequency Response 15Hz - 50kHz (+0, -1dB)\u003c\/li\u003e\n\u003cli\u003eEquivalent Input Noise -129dBu (XLR, \"A\" weighted)\u003c\/li\u003e\n\u003cli\u003eCMRR \u0026gt;90dB THD \u0026lt;0.005% (Typical\u003c\/li\u003e\n\u003cli\u003ePower Requirements 100-120V 60Hz \/ 220-240V 50Hz\u003c\/li\u003e\n\u003cli\u003eDimensions (HWD) 5\" x 20.4\" x 7.44\" 12.6cm x 51.8cm x 18.9cm\u003c\/li\u003e\n\u003cli\u003eWeight 5.6 lb \/ 2.5kg\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eShop the ART Solo MPA and more ART Pro Audio gear at SixStarPSL.\u003c\/p\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":67676703260946,"sku":"SOLOMPA","price":305.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0379\/2529\/0029\/files\/lg_solompa-front-ce.jpg?v=1794425795"},{"product_id":"art-dj-pre-ii-djpre-2","title":"ART DJ PRE II, RIAA Turntable Phono Preamp","description":"\u003ch2\u003eART DJ PRE II RIAA Turntable Phono Preamp\u003c\/h2\u003e\u003cp\u003eVinyl offers a unique listening experience, and a phono preamp is an important component in getting the best sound reproduction from your records.\u003c\/p\u003e\u003cp\u003eAn audiophile grade preamp can cost hundreds or even thousands of dollars, but there are accessible alternatives that will enhance your listening experience without a boutique price tag. The DJ Pre II is the most affordable phono preamp from ART, and was named Best Budget Preamp by Popular Science magazine in 2022, 2023, and 2024.\u003c\/p\u003e\u003cp\u003eBeyond its high quality, low noise circuitry, the DJ Pre II offers more control of your sound. Boost or cut by up to 10 dB for proper gain staging into the rest of your system, engage the low cut filter to eliminate rumble, and switch the input capacitance between 100 and 200 picofarads (pF) to find the response that best matches your cartridge for the most pleasing tone.\u003c\/p\u003e\u003cp\u003eOffering clear sound and essential control, the DJ Pre II is a compact, convenient upgrade to your sound system that costs less than an afternoon of digging through the crates at your favourite record store.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHigh accuracy\/low noise preamp\u003c\/li\u003e\n\u003cli\u003eSwitchable low cut rumble filter\u003c\/li\u003e\n\u003cli\u003eVariable preamp gain\u003c\/li\u003e\n\u003cli\u003eSignal present\/clip indicator\u003c\/li\u003e\n\u003cli\u003eSelectable cartridge loading\u003c\/li\u003e\n\u003cli\u003eRCA preamp outputs\u003c\/li\u003e\n\u003cli\u003eHeavy duty extruded chassis\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eInputs RCA\u003c\/li\u003e\n\u003cli\u003eOutputs RCA\u003c\/li\u003e\n\u003cli\u003eInput Impedance 47k Ω in Parallel with Either 100pF or 200pF\u003c\/li\u003e\n\u003cli\u003eMaximum Input Level 40mVrms @1kHz\u003c\/li\u003e\n\u003cli\u003eMaximum Output Level +6 dBu (1.4Vrms)\u003c\/li\u003e\n\u003cli\u003eMaximum Gain 45dB @1KHz\u003c\/li\u003e\n\u003cli\u003eFrequency Response 10 Hz -50 KHz, +\/-.5 dB\u003c\/li\u003e\n\u003cli\u003eTotal Harmonic Distortion .01% Typical @ 1 kHz\u003c\/li\u003e\n\u003cli\u003ePower Requirements 7-12 V DC or 9-12 V AC @150 mA\u003c\/li\u003e\n\u003cli\u003eDimensions 1.85″ x 4.6″ x 4.5″ (4.7 cm x 11.7 cm x 11.4 cm)\u003c\/li\u003e\n\u003cli\u003eWeight 1.25 lbs \/ 0.57kg\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eShop the ART DJ PRE II and more ART Pro Audio gear at SixStarPSL.\u003c\/p\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":67676703326482,"sku":"DJPRE-2","price":69.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0379\/2529\/0029\/files\/lg_299794a4076e86e2336a6b723067cec0.jpg?v=1794425798"},{"product_id":"art-precision-phono-pre-precisionphonou","title":"ART Precision Phono Pre, MM and MC Phono Preamp","description":"\u003ch2\u003eART Precision Phono Pre MM and MC Phono Preamp\u003c\/h2\u003e\u003cp\u003eThe Precision Phono Pre is a uniquely affordable preamp for music fans who want to enhance the performance of their turntable with a moving coil cartridge.\u003c\/p\u003e\u003cp\u003eThis type of cartridge offers a detailed and nuanced soundscape, with a wider frequency range and faster transient response than the more common moving magnet design. Its often the preferred choice for audiophiles in pursuit of the ultimate listening experience.\u003c\/p\u003e\u003cp\u003eHowever, moving coil cartridges produce a lower signal level, and require a preamp with enough gain to drive the rest of the system and take full advantage of the cartridges strengths.\u003c\/p\u003e\u003cp\u003eThe Precision Phono Pre has switchable modes to support both moving coil and moving magnet cartridges. Input loading for the moving coil input is switchable between 25 and 100 ohms for additional sonic flexibility.\u003c\/p\u003e\u003cp\u003eIt also offers up to 10 dB of boost or cut for proper gain staging, a low cut filter to eliminate unwanted rumble and resonance, and gold plated outputs for durable, corrosion free connections.\u003c\/p\u003e\u003cp\u003eThe Precision Phono Pre has been meticulously designed to grow with your system as it evolves, and to help your vinyl collection sound its best with any cartridge.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eConnect any turntable to a wide variety of audio systems\u003c\/li\u003e\n\u003cli\u003ePerfect for DJs and vinyl enthusiasts\u003c\/li\u003e\n\u003cli\u003eSwitchable low cut rumble filter\u003c\/li\u003e\n\u003cli\u003eVariable preamp gain\u003c\/li\u003e\n\u003cli\u003eSignal Present\/Clip Indicator\u003c\/li\u003e\n\u003cli\u003eRCA preamp outputs\u003c\/li\u003e\n\u003cli\u003eExternal power supply for lower noise\u003c\/li\u003e\n\u003cli\u003eHigh accuracy\/ low noise phono preamp\u003c\/li\u003e\n\u003cli\u003eMoving Coil\/Moving Magnet switchable input\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eInputs Gold plated RCA Jacks 47 k \/ 100pf (MM) or 25\/100 Ω (MC, switchable)\u003c\/li\u003e\n\u003cli\u003eOutputs Gold plated RCA Jacks, 100 Ω\u003c\/li\u003e\n\u003cli\u003eMaximum Input Level 440 mV (1 kHz, MM mode) \/ 44mV (1kHZ, MC mode)\u003c\/li\u003e\n\u003cli\u003eMaximum Output Level 6V RMS \/ +18dBu\u003c\/li\u003e\n\u003cli\u003eMaximum Gain 43dB (MM)\/63dB (MC)\u003c\/li\u003e\n\u003cli\u003eFrequency Response 20 Hz , 20 kHz, +\/-0.5dB\u003c\/li\u003e\n\u003cli\u003eTotal Harmonic Distortion \u0026lt;0.0010% {typical}\u003c\/li\u003e\n\u003cli\u003eEquivalent Input Noise 346nV, -127dBu\u003c\/li\u003e\n\u003cli\u003eEnclosure All aluminum black anodized with integral rubber sides\u003c\/li\u003e\n\u003cli\u003ePower Requirements Input: 100-240V AC~50\/60Hz\u003c\/li\u003e\n\u003cli\u003eOutput: 12V DC @ ≥ 800 mA\u003c\/li\u003e\n\u003cli\u003eDimensions 1.87\" x 4.61\" x 4.27\" (4.75 cm x 11.7 cm x 10.8 cm\u003c\/li\u003e\n\u003cli\u003eWeight 1.89 lbs \/ 0.86 kg\u003c\/li\u003e\n\u003cli\u003eNote 0 dBu = 0.775Vrms\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eShop the ART Precision Phono Pre and more ART Pro Audio gear at SixStarPSL.\u003c\/p\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":67676703359250,"sku":"PRECISIONPHONOU","price":119.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0379\/2529\/0029\/files\/lg_ppp-front.jpg?v=1794425800"},{"product_id":"art-pro-vla-iii-provlaiii","title":"ART Pro VLA III, 2 Channel Tube Opto Compressor, 2U","description":"\u003ch2\u003eART Pro VLA III 2 Channel Tube Opto Compressor, 2U\u003c\/h2\u003e\u003cp\u003eThe Pro VLA compressor has been one of the most popular ART products for over two decades. It's the secret weapon. The cult classic. The Rochester sound. Tape Op called the original \"one of the best compressors ever made at its price point\", and we've continued that tradition with the new Pro VLA III.\u003c\/p\u003e\u003cp\u003eLike the earlier models, it's an optical compressor with two channels that can be used independently or linked for stereo operation. It offers musical control of dynamics that can smooth out individual tracks or glue a full mix together. It uses a fixed input, variable threshold design, and offers the authentic character of a real 12AT7 tube.\u003c\/p\u003e\u003cp\u003eNew to this version, the Voice switch selects between a warm tube or clean solid state signal path to best match your source material. The ratio range has been extended down to 1.25:1, providing even more subtle control when you need gentle compression for mastering applications. We've increased the available headroom, lowered background noise, and improved the channel symmetry in the linked stereo mode. The front panel has also been refreshed to match the Pro Channel III.\u003c\/p\u003e\u003cp\u003eThe Pro VLA III also offers variable threshold, attack, release, and output controls, independent bypass per channel, and simultaneous metering of input level, output level, and gain reduction. The rear panel has balanced XLR and 1\/4\" inputs and outputs, and a button to select +4 dBu or -10 dBV operation.\u003c\/p\u003e\u003cp\u003eCompression is one of the most powerful tools in the studio, and with all analog circuitry and real tube tone, the Pro VLA III will help you push your mixes to a higher level.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eTwo Channel Optical Compressor\u003c\/li\u003e\n\u003cli\u003eSwitchable Tube and Solid State Voicings\u003c\/li\u003e\n\u003cli\u003eInput, Output, and Gain Reduction Metering\u003c\/li\u003e\n\u003cli\u003eVariable Threshold, Ratio, Attack, and Release\u003c\/li\u003e\n\u003cli\u003eDual Mono or Linked Stereo Operation\u003c\/li\u003e\n\u003cli\u003e12AT7 Tube\u003c\/li\u003e\n\u003cli\u003e+4 dBu or -10 dBV Operation\u003c\/li\u003e\n\u003cli\u003eUniversal Internal Power Supply\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eInput Impedance: 10 kΩ (Balanced \/ Unbalanced)\u003c\/li\u003e\n\u003cli\u003eMaximum Input Level: +20 dBu (+4 dBu Mode)\u003c\/li\u003e\n\u003cli\u003e+10 dBV (-10 dBV Mode)\u003c\/li\u003e\n\u003cli\u003eMaximum Output Level: +20 dB Max\u003c\/li\u003e\n\u003cli\u003eFrequency Response: 10 Hz to 50 kHz (+0 \/ -1 dB)\u003c\/li\u003e\n\u003cli\u003eTotal Harmonic Distortion: \u0026lt; 0.005% (Solid State)\u003c\/li\u003e\n\u003cli\u003eEquivalent Input Noise: -99 dBu (+4 dBu Mode, A Weighted)\u003c\/li\u003e\n\u003cli\u003e-107 dBu (-10 dBV Mode, A Weighted)\u003c\/li\u003e\n\u003cli\u003ePower Requirements: 100-240V 50Hz\/60Hz 25W\u003c\/li\u003e\n\u003cli\u003eRear mounted IEC connector\u003c\/li\u003e\n\u003cli\u003eDimensions (DWH): 3.5\" x 19\" x 9.2\" (8.9 cm x 48.3 cm x 23.4 cm)\u003c\/li\u003e\n\u003cli\u003eWeight: 10.5 lbs \/ 4.76 kg\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eShop the ART Pro VLA III and more ART Pro Audio gear at SixStarPSL.\u003c\/p\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":67676703424786,"sku":"PROVLAIII","price":449.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0379\/2529\/0029\/files\/lg_provla3-front.jpg?v=1794425802"},{"product_id":"art-solo-vla-solovla","title":"ART Solo VLA, Single Channel Tube Opto Compressor, 1U","description":"\u003ch2\u003eART Solo VLA Single Channel Tube Opto Compressor, 1U\u003c\/h2\u003e\u003cp\u003eThe ART Solo Series is a range of highly affordable, all analog, single channel processors. They offer flexible tone shaping with intuitive controls and the unmistakable sound of real tubes.\u003c\/p\u003e\u003cp\u003eThe Solo VLA is a rackmount compressor with switchable opto and FET voicings for your choice of smooth or punchy dynamic processing. The optical mode features a 12AT7 tube in the signal path for additional warmth.\u003c\/p\u003e\u003cp\u003eIn addition to variable threshold, ratio, attack, and release, it also features a blend control for parallel compression. This lets you add the fullness and sustain from your compressed signal while preserving the full dynamic range of your original performance.\u003c\/p\u003e\u003cp\u003eThe compressor circuit can be bypassed for easy comparison, and the switchable VU meter can monitor gain reduction or output level.\u003c\/p\u003e\u003cp\u003eFor two classic flavours of compression in a single 1U enclosure, put the squeeze on your tracks with the Solo VLA.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStudio Quality Audio Signal Path\u003c\/li\u003e\n\u003cli\u003eSelectable Multi Voice Tube\/Solid State Control\u003c\/li\u003e\n\u003cli\u003eHand selected 12AT7 Tube\u003c\/li\u003e\n\u003cli\u003eOPTO , Analog Optical Isolators (AOI)\u003c\/li\u003e\n\u003cli\u003eVariable Threshold and Ratio Controls\u003c\/li\u003e\n\u003cli\u003eVariable Attack and Release Controls\u003c\/li\u003e\n\u003cli\u003eVariable Blend for Parallel Compression\u003c\/li\u003e\n\u003cli\u003eSelectable Level Modes(+4dBu\/-10dBV)\u003c\/li\u003e\n\u003cli\u003e20Hz to 80KHz Frequency Response (+0db+\/-1dB)\u003c\/li\u003e\n\u003cli\u003e\u0026gt;100dB (20-20k Hz) Dynamic Range\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eInput Impedance 10k Ω\u003c\/li\u003e\n\u003cli\u003eOutput Impedance 47 Ω\u003c\/li\u003e\n\u003cli\u003eFrequency Response 20 Hz to 80 kHz (+ 0\/-1 dB)\u003c\/li\u003e\n\u003cli\u003eTotal Harmonic Distortion \u0026lt;0.02% (Typical)\u003c\/li\u003e\n\u003cli\u003eEquivalent Input Noise +4 dBu Mode -99 dBu (‘A' Weighted) -10 dBv Mode-107dBu (‘A' Weighted)\u003c\/li\u003e\n\u003cli\u003ePower Requirements 100-120 V 60 Hz \/ 220-240 V 50 Hz\u003c\/li\u003e\n\u003cli\u003eDimensions (DWH) 6.0\" x 19\" x 1.75\", 15.2 cm x 48.3 cm x 4.45 cm\u003c\/li\u003e\n\u003cli\u003eWeight 5.6 lb \/ 2.5kg\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eShop the ART Solo VLA and more ART Pro Audio gear at SixStarPSL.\u003c\/p\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":67676703457554,"sku":"SOLOVLA","price":275.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0379\/2529\/0029\/files\/lg_solovla-front-ce.jpg?v=1794425801"},{"product_id":"art-solo-studio-solostudio","title":"ART Solo Studio, Single Channel Tube Channel Strip, 1U","description":"\u003ch2\u003eART Solo Studio Single Channel Tube Channel Strip, 1U\u003c\/h2\u003e\u003cp\u003eThe ART Solo Series is a range of highly affordable, all analog, single channel processors. They offer flexible tone shaping with intuitive controls and the unmistakable sound of real tubes.\u003c\/p\u003e\u003cp\u003eThe Solo Studio might be the most versatile member of the family, combining elements of the Solo MPA preamp and Solo VLA compressor into a single 1U channel strip.\u003c\/p\u003e\u003cp\u003eIt offers 40 dB of input gain, phantom power, a tilt EQ to balance lows and highs, and an 80 Hz high pass filter to reduce rumble and tighten bass.\u003c\/p\u003e\u003cp\u003eActivate the optical compressor for smooth, transparent control of your dynamics and your choice of a pristine clean or warm tube signal path. The backlit VU meter can show gain reduction or output level for easy reference.\u003c\/p\u003e\u003cp\u003eThe front combo jack lets you quickly change sources without getting behind your rack. The rear panel has XLR and 1\/4 inputs and outputs, and an insert point between the preamp and compression stages.\u003c\/p\u003e\u003cp\u003ePacked with features, the Solo Studio is a powerful channel strip and DI that expands your recording setup with flexible tone shaping, musical compression, and real tube saturation.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e48 Volt Switchable Phantom Power\u003c\/li\u003e\n\u003cli\u003eSelectable Multi Voice Tube\/Solid State Control\u003c\/li\u003e\n\u003cli\u003eHand selected 12AT7 Tube\u003c\/li\u003e\n\u003cli\u003eOPTO , Analog Optical Isolators (AOI)\u003c\/li\u003e\n\u003cli\u003eOptical Controlled Compression\u003c\/li\u003e\n\u003cli\u003ePre Compression Insert Loop\u003c\/li\u003e\n\u003cli\u003eFlexible Tilt EQ\u003c\/li\u003e\n\u003cli\u003eSelectable Low Cut Filter (HPF)\u003c\/li\u003e\n\u003cli\u003eVariable Threshold and Ratio controls\u003c\/li\u003e\n\u003cli\u003eVariable Attack and Release controls\u003c\/li\u003e\n\u003cli\u003eVariable Blend (Compression)\u003c\/li\u003e\n\u003cli\u003eVariable Output Level Control\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eInput Impedance 47k Ω (XLR), \u0026gt;800k Ω (Instrument)\u003c\/li\u003e\n\u003cli\u003eOutput Impedance \u0026lt; 47Ω (XLR)\u003c\/li\u003e\n\u003cli\u003eMaximum Input Level +19dBu (XLR)\u003c\/li\u003e\n\u003cli\u003eMaximum Output Level +27dBu (XLR)\u003c\/li\u003e\n\u003cli\u003eMaximum Gain 55dB\u003c\/li\u003e\n\u003cli\u003eFrequency Response 15Hz - 50kHz (+0, -1dB)\u003c\/li\u003e\n\u003cli\u003eEquivalent Input Noise -129dBu (XLR, \"A\" weighted)\u003c\/li\u003e\n\u003cli\u003eCMRR \u0026gt;90dB\u003c\/li\u003e\n\u003cli\u003ePower Requirements 100-240V 50Hz\/60Hz\u003c\/li\u003e\n\u003cli\u003eDimensions (HWD) 1.75\" x 19\" x 6.0\" (4.45cm x 48.3cm x 15.2cm)\u003c\/li\u003e\n\u003cli\u003eWeight 5.6 lbs \/ 2.5 kg\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eShop the ART Solo Studio and more ART Pro Audio gear at SixStarPSL.\u003c\/p\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":67676703490322,"sku":"SOLOSTUDIO","price":309.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0379\/2529\/0029\/files\/lg_solostudio-front.jpg?v=1794425803"},{"product_id":"art-pro-channel-iii-prochanneliii","title":"ART Pro Channel III, Tube Mic Preamp, Opto Compressor and Parametric EQ, 2U","description":"\u003ch2\u003eART Pro Channel III Tube Mic Preamp, Opto Compressor and Parametric EQ, 2U\u003c\/h2\u003e\u003cp\u003eThe Pro Channel III is a fully featured channel strip with selectable mic impedance, two compression voicings, and semi parametric EQ.\u003c\/p\u003e\u003cp\u003eNew to this version, the compressor has both Tube\/Opto and FET modes for smooth or punchy dynamic control. The compressor and EQ sections can now be reordered at the touch of a button, and the front panel has been streamlined for a faster, simpler workflow.\u003c\/p\u003e\u003cp\u003eThe mic preamp features a discrete FET input stage and up to 60 dB of preamp gain, with a variable low cut filter to eliminate rumble and tighten bass.\u003c\/p\u003e\u003cp\u003eThe EQ section offers a switchable low shelf frequency, variable low mid and high mid frequencies with over 4 octaves of range per band, and a 12 kHz high shelf.\u003c\/p\u003e\u003cp\u003eThe Pro Channel III is also a versatile instrument DI. Connecting to the front 1\/4 input will override the rear XLR input so you can record direct tracks without disconnecting your mic or line signal.\u003c\/p\u003e\u003cp\u003eDesigned for recording musicians seeking a versatile character preamp with real tube warmth, the Pro Channel III offers the flexibility and fidelity to sculpt and enhance any source.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eClass A FET Microphone Preamp\u003c\/li\u003e\n\u003cli\u003eSelectable Microphone Impedance\u003c\/li\u003e\n\u003cli\u003e1\/4\" High Z Input on Front Panel\u003c\/li\u003e\n\u003cli\u003eCompressor and EQ Sections with Switchable Order and Independent Bypass\u003c\/li\u003e\n\u003cli\u003eTube\/Opto and FET Compressor Voicings\u003c\/li\u003e\n\u003cli\u003e4-Band Semi Parametric EQ and Variable Low Cut Filter\u003c\/li\u003e\n\u003cli\u003eInsert Point after Preamp Stage\u003c\/li\u003e\n\u003cli\u003e+4 dBu or -10 dBv Operation\u003c\/li\u003e\n\u003cli\u003eUniversal Internal Power Supply\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eInput Impedance 600Ω \/ 47 kΩ (XLR) \u0026gt;800 kΩ (Instrument) 7.5 kΩ (Insert)\u003c\/li\u003e\n\u003cli\u003eOutput Impedance \u0026lt; 47Ω (XLR)\u003c\/li\u003e\n\u003cli\u003eMaximum Input Level +22 dBu (+4dBu Mode) +13 dBu (-10dBV Mode) Balanced\u003c\/li\u003e\n\u003cli\u003eMaximum Output Level +26dBu (Balanced), +20dBu (Unbalanced)\u003c\/li\u003e\n\u003cli\u003eMaximum Gain 40dB Variable Input Gain 20dB Switchable Boost , 15dB Variable Output Gain\u003c\/li\u003e\n\u003cli\u003eFrequency Response 12Hz to 100kHz (+0, -1dB)\u003c\/li\u003e\n\u003cli\u003eTotal Harmonic Distortion \u0026gt;90dB\u003c\/li\u003e\n\u003cli\u003eEquivalent Input Noise -128dBu (Mic \/ Line) -109dBu (Instrument)\u003c\/li\u003e\n\u003cli\u003eCMRR \u0026gt;90dB\u003c\/li\u003e\n\u003cli\u003ePower Requirements 100 , 240V 50Hz \/ 60 Hz 25W\u003c\/li\u003e\n\u003cli\u003eDimensions (HWD) 3.5\" x 19\" x 9.2\", 8.9cm x 48.3cm x 23.3cm\u003c\/li\u003e\n\u003cli\u003eWeight 10.5lbs \/ 4.76kg\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eShop the ART Pro Channel III and more ART Pro Audio gear at SixStarPSL.\u003c\/p\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":67676703523090,"sku":"PROCHANNELIII","price":469.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0379\/2529\/0029\/files\/lg_prochannel3-front.jpg?v=1794425805"},{"product_id":"art-scl2-scl2","title":"ART SCL2, 2 Channel Compressor Limiter with Expander Gate","description":"\u003ch2\u003eART SCL2 2 Channel Compressor Limiter with Expander Gate\u003c\/h2\u003e\u003cp\u003eThe SCL2 is a comprehensive dynamics processor in a 1U rackmount format. It offers two channels with VCA compression, limiting, expansion, gating, and sidechain inputs. Dual LED meters indicate gain reduction, output level, and gate threshold.\u003c\/p\u003e\u003cp\u003eDespite this versatility, a streamlined interface makes it easy to dial in the right settings for any task. Each channel has independent switches for bypass, hard knee or soft knee compression, manual or automatic control of attack and release, and to toggle between the expander or gate modes. A global switch changes between dual or linked stereo operation.\u003c\/p\u003e\u003cp\u003eDesigned for live sound, studio, and voiceover applications, the SCL2 is sonically transparent, packed with features, and simple to use.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDual Channel or Linked Stereo Operation\u003c\/li\u003e\n\u003cli\u003e1\/4-Inch TRS Side Chain Inserts\u003c\/li\u003e\n\u003cli\u003e1\/4-Inch TRS And XLR Balanced Inputs\u003c\/li\u003e\n\u003cli\u003e1\/4-Inch TRS And XLR Balanced Outputs\u003c\/li\u003e\n\u003cli\u003eStereo Mode Balance Control\u003c\/li\u003e\n\u003cli\u003eLed Gain Reduction Meters\u003c\/li\u003e\n\u003cli\u003eSelectable Auto\/ Manual Attack\/Release\u003c\/li\u003e\n\u003cli\u003eSelectable Hard\/Soft Knee\u003c\/li\u003e\n\u003cli\u003ePrecise Led Level Meters\u003c\/li\u003e\n\u003cli\u003eInternal Power Supply\u003c\/li\u003e\n\u003cli\u003eAll Steel Chassis\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eInputs 1\/4\" TRS Balanced\u003c\/li\u003e\n\u003cli\u003eOutputs 1\/4\" TRS Balanced\u003c\/li\u003e\n\u003cli\u003eInput Impedance 10k Ω\u003c\/li\u003e\n\u003cli\u003eOutput Impedance 200 Ω (Balanced), 100 Ω (Unbalanced)\u003c\/li\u003e\n\u003cli\u003eMaximum Input Level +20 dBu Balanced\u003c\/li\u003e\n\u003cli\u003eMaximum Output Level +20 dBu Balanced\u003c\/li\u003e\n\u003cli\u003eFrequency Response 10 Hz to 40 kHz, +\/- .5 dB\u003c\/li\u003e\n\u003cli\u003eTotal Harmonic Distortion \u0026lt;0.06% (Typical)\u003c\/li\u003e\n\u003cli\u003ePower Requirements 120 V 60 Hz\/50H, 10 W Max.\u003c\/li\u003e\n\u003cli\u003eDimensions (DWH) 6\" x 19.0\" X 1.75\" (15.2 cm x 48 cm x 4.5 cm )\u003c\/li\u003e\n\u003cli\u003eWeight 4.2 lbs (1.9 kg)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eShop the ART SCL2 and more ART Pro Audio gear at SixStarPSL.\u003c\/p\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":67676703555858,"sku":"SCL2","price":199.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0379\/2529\/0029\/files\/lg_scl2-front.jpg?v=1794425809"},{"product_id":"art-phantom-ii-pro-phantom2pro","title":"ART Phantom II Pro, 2 Channel 48V Phantom Power Supply","description":"\u003ch2\u003eART Phantom II Pro 2 Channel 48V Phantom Power Supply\u003c\/h2\u003e\u003cp\u003eThe Phantom II Pro delivers two channels of 48-volt phantom power in a compact enclosure. It can be powered by a 9-volt battery or external adapter (not included).\u003c\/p\u003e\u003cp\u003eIt features innovative low power circuitry that provides over 10 hours of battery life under a full load on both channels. Its a great solution for mobile recording, especially with a bus powered interface.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eXLR connectors for balanced inputs and outputs\u003c\/li\u003e\n\u003cli\u003eLow power, high efficiency CMOS circuitry for Long battery life using a standard 9 Volt battery (Alkaline recommended)\u003c\/li\u003e\n\u003cli\u003eCan be powered with an external power supply for operation from AC mains\u003c\/li\u003e\n\u003cli\u003eRugged extruded aluminum case with accessible battery compartment\u003c\/li\u003e\n\u003cli\u003eLED lighted On\/Off switch\u003c\/li\u003e\n\u003cli\u003eLow noise, low distortion circuitry\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eInputs 2x XLR\u003c\/li\u003e\n\u003cli\u003eOutputs 2x XLR\u003c\/li\u003e\n\u003cli\u003ePower Requirements 9V battery (IEC 6LR61, ANSI-1604A type Alkaline recommended) or external supply 7.5-12 V AC\/DC, Any Polarity, \u0026lt;150 mA\u003c\/li\u003e\n\u003cli\u003eDimensions 1.85″ x 4.6″ x 3.9″ (4.7 cm x11.7 cm x 9.9 cm)\u003c\/li\u003e\n\u003cli\u003eWeight .82 lbs \/ .37 kg\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eShop the ART Phantom II Pro and more ART Pro Audio gear at SixStarPSL.\u003c\/p\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":67676703588626,"sku":"PHANTOM2PRO","price":119.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0379\/2529\/0029\/files\/lg_phantomiipro_front.jpg?v=1794425812"},{"product_id":"art-headamp-6-headamp6","title":"ART HeadAmp 6, 6 Channel Headphone Amplifier, 1U","description":"\u003ch2\u003eART HeadAmp 6 6 Channel Headphone Amplifier, 1U\u003c\/h2\u003e\u003cp\u003eThe HeadAmp 6 is a six channel stereo headphone amplifier with three outputs per channel, so up to eighteen sets of headphones can be connected simultaneously.\u003c\/p\u003e\u003cp\u003eEach channel features an independent auxiliary input with a balance control, so its easy to dial in a more me mix. Additional switches mute the left or right signal and sum the channel to mono, so listeners have the control to hear exactly what they need.\u003c\/p\u003e\u003cp\u003eLED meters with clipping indicators for the main signal bus and each output channel confirm signal activity at a glance.\u003c\/p\u003e\u003cp\u003eThe rear panel has balanced XLR and 1\/4 inputs, and Thru connectors to chain multiple units for even more outputs. A Direct input on the front panel overrides the rear signal, so you can quickly switch sources without getting behind the rack.\u003c\/p\u003e\u003cp\u003eThe HeadAmp 6 offers the most outputs of any ART headphone amplifier, and is ideal for working with large ensembles.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e6x Output Channels\u003c\/li\u003e\n\u003cli\u003eStereo XLR and 1\/4\" Balanced Inputs\u003c\/li\u003e\n\u003cli\u003e1\/4\" Direct In Overrides Rear Inputs\u003c\/li\u003e\n\u003cli\u003e3x 1\/4\" Headphone Outputs per Channel\u003c\/li\u003e\n\u003cli\u003eSupports up to 18 Pairs of Headphones\u003c\/li\u003e\n\u003cli\u003eAux In with Main \/ Aux Balance per Channel\u003c\/li\u003e\n\u003cli\u003eMute L, Mute R, and Mono Switches per Channel\u003c\/li\u003e\n\u003cli\u003eLED Meters with Clip Indicators for Main Bus and Output Channels\u003c\/li\u003e\n\u003cli\u003e1U Rackmount\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eInputs XLR, 1\/4\"\u003c\/li\u003e\n\u003cli\u003eOutputs XLR, 1\/4\"\u003c\/li\u003e\n\u003cli\u003eInput Impedance 40K Ω Main, 10K Ω Direct, 15K Ω Aux In\u003c\/li\u003e\n\u003cli\u003eOutput Impedance \u0026lt;12 ΩHeadphones\u003c\/li\u003e\n\u003cli\u003eMaximum Input Level +21 dBu\u003c\/li\u003e\n\u003cli\u003eMaximum Output Level 150mW (600 Ω Headphones) 500mW (32 Ω Headphones) 150mW (8 Ω Headphone\u003c\/li\u003e\n\u003cli\u003eMaximum Gain 22 dB\u003c\/li\u003e\n\u003cli\u003eTotal Harmonic Distortion \u0026lt;.01% Typical\u003c\/li\u003e\n\u003cli\u003eSignal to Noise Ratio \u0026gt;90dB Typical\u003c\/li\u003e\n\u003cli\u003eCMRR \u0026gt;40 dB\u003c\/li\u003e\n\u003cli\u003ePower Requirements 120 VAC \/ 50-60 Hz, or 230 VAC \/ 50 Hz, 15 W\u003c\/li\u003e\n\u003cli\u003eDimensions (LWH) 6\" x 19\" x 1.75\", 15.2 cm x 48.3 x 4.45\u003c\/li\u003e\n\u003cli\u003eWeight 5.3 lbs. (2.4kg)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eShop the ART HeadAmp 6 and more ART Pro Audio gear at SixStarPSL.\u003c\/p\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":67676703621394,"sku":"HEADAMP6","price":229.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0379\/2529\/0029\/files\/lg_headamp6-front.jpg?v=1794425810"},{"product_id":"art-headamp-6-pro-headamp6pro","title":"ART HeadAmp 6 Pro, 6 Channel Pro Headphone Amplifier with EQ, 1U","description":"\u003ch2\u003eART HeadAmp 6 Pro 6 Channel Pro Headphone Amplifier with EQ, 1U\u003c\/h2\u003e\u003cp\u003eThe HeadAmp 6 Pro is ARTs most fully featured headphone amplifier. It has six channels with flexible controls, detailed metering, and two outputs per channel, so up to twelve sets of headphones can be connected simultaneously.\u003c\/p\u003e\u003cp\u003eEach channel features an independent auxiliary input with a balance control, so its easy to dial in a more me mix. Additional switches mute the left or right signal and sum the channel to mono, so listeners have the control to hear exactly what they need.\u003c\/p\u003e\u003cp\u003eThe main signal bus and output channels feature 8-segment LED meters with clip indicators for detailed visual feedback. The rear panel has balanced XLR and 1\/4 inputs, and Thru connectors to chain multiple units for even more outputs. A Direct input on the front panel overrides the rear signal, so you can easily switch sources without getting behind the rack.\u003c\/p\u003e\u003cp\u003eThe HeadAmp 6 Pro offers the most control of any ART headphone amplifier, and is ideal for working with medium to large ensembles.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e6x Output Channels\u003c\/li\u003e\n\u003cli\u003eStereo XLR and 1\/4\" XLR Balanced Inputs\u003c\/li\u003e\n\u003cli\u003e1\/4\" Direct In Overrides Rear Inputs\u003c\/li\u003e\n\u003cli\u003e2x 1\/4\" Headphone Outputs per Channel\u003c\/li\u003e\n\u003cli\u003eSupports up to 12 Pairs of Headphones\u003c\/li\u003e\n\u003cli\u003eAux In with Main \/ Aux Balance per Channel\u003c\/li\u003e\n\u003cli\u003eMono L and Mono R Switches per Channel\u003c\/li\u003e\n\u003cli\u003e2-Band EQ per Channel\u003c\/li\u003e\n\u003cli\u003eLED Meters with Clip Indicators for Main Bus and Output Channels\u003c\/li\u003e\n\u003cli\u003e1U Rackmount\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eInputs XLR, 1\/4\"\u003c\/li\u003e\n\u003cli\u003eOutputs 1\/4\"\u003c\/li\u003e\n\u003cli\u003eMaximum Input Level +20 dBu\u003c\/li\u003e\n\u003cli\u003eFrequency Response 10 Hz to 40 KHz +\/- 1 dB\u003c\/li\u003e\n\u003cli\u003eTotal Harmonic Distortion \u0026lt;0.010% (Typical)\u003c\/li\u003e\n\u003cli\u003ePower Requirements 120 vac 60 Hz\u003c\/li\u003e\n\u003cli\u003eDimensions (LWH) 6.5″x 5.9″ x 1.75″, 16.5cmx 15.0 cm x 4.45 cm\u003c\/li\u003e\n\u003cli\u003eWeight 2.5 lbs. (1.14 kg)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eShop the ART HeadAmp 6 Pro and more ART Pro Audio gear at SixStarPSL.\u003c\/p\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":67676703654162,"sku":"HEADAMP6PRO","price":295.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0379\/2529\/0029\/files\/lg_headamp6pro-front.jpg?v=1794425813"},{"product_id":"art-headtap-headtap","title":"ART HeadTap, Passive Headphone Tap","description":"\u003ch2\u003eART HeadTap Passive Headphone Tap\u003c\/h2\u003e\u003cp\u003eSometimes, floor monitors can be a problem. Perhaps there isnt enough room on stage, or somebody sits in and there isnt sufficient coverage. When it isnt easy to add another monitor, the HeadTap makes it easy to add headphones.\u003c\/p\u003e\u003cp\u003eIts designed to connect between a power amp and speaker, tapping the signal to drive two headphone outputs. Internal resistors keep the impedance high enough to protect the headphones, and the amplifier is protected from encountering a load impedance that's too low when using one or more HeadTap units, with or without speakers connected.\u003c\/p\u003e\u003cp\u003eThe HeadTap will also work with a stereo headphone amplifier such as the ART HeadAmp 4, HeadAmp 6, or HeadAmp 6 Pro to power even more headsets.\u003c\/p\u003e\u003cp\u003ePassive, compact, and convenient, the HeadTap is a simple solution that lets you hear what you need, where you need it.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCreates a Headphone Tap between a Power Amp and Speaker\u003c\/li\u003e\n\u003cli\u003eParallel 1\/4\" Inputs to Daisy Chain Taps and Speakers\u003c\/li\u003e\n\u003cli\u003eMono \/ Stereo Input Selector\u003c\/li\u003e\n\u003cli\u003eDual 1\/4\" Headphone Jacks with Level Control\u003c\/li\u003e\n\u003cli\u003ePassive Design, No Power Required\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eInputs 1\/4\"\u003c\/li\u003e\n\u003cli\u003eOutputs 2 x 1\/4\"\u003c\/li\u003e\n\u003cli\u003eInput Impedance 100 Ω\u003c\/li\u003e\n\u003cli\u003eDimensions (LWH) 2.8″ x 3.7 x 1.7″, 7.0 cm x 9.3 cm, 4.3 cm\u003c\/li\u003e\n\u003cli\u003eWeight 1.0 lb (4.6 kg)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eShop the ART HeadTap and more ART Pro Audio gear at SixStarPSL.\u003c\/p\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":67676703686930,"sku":"HEADTAP","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0379\/2529\/0029\/files\/lg_headtap-top.jpg?v=1794425820"},{"product_id":"art-headamp-4-headamp4","title":"ART HeadAmp 4, 4 Channel Stereo Headphone Amplifier","description":"\u003ch2\u003eART HeadAmp 4 4 Channel Stereo Headphone Amplifier\u003c\/h2\u003e\u003cp\u003eThe HeadAmp 4 is a high output, low noise, low distortion headphone amplifier that extends the connectivity of your mixer, audio interface, or other sound source.\u003c\/p\u003e\u003cp\u003eIt features four output channels with independent volume controls. Each output has 1\/4 and 1\/8 stereo connections that can be used simultaneously, so you can connect up to 8 pairs of headphones.\u003c\/p\u003e\u003cp\u003eCompact and durable, the HeadAmp 4 is an ideal solution to split a signal between multiple listeners.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e4x Output Channels\u003c\/li\u003e\n\u003cli\u003eIndependent Volume Per Channel\u003c\/li\u003e\n\u003cli\u003eStereo 1\/4\" and 1\/8\" Inputs\u003c\/li\u003e\n\u003cli\u003e2x 1\/4\" and 1\/8\" Headphone Outputs per Channel\u003c\/li\u003e\n\u003cli\u003eSupports up to 8 Pairs of Headphones\u003c\/li\u003e\n\u003cli\u003e12V DC Adapter Included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eInputs 1\/4\" \u0026amp; 1\/8\"\u003c\/li\u003e\n\u003cli\u003eOutputs 1\/4\" \u0026amp; 1\/8\"\u003c\/li\u003e\n\u003cli\u003eInput Impedance 90.9k Ω\u003c\/li\u003e\n\u003cli\u003eOutput Impedance 47 Ω (Each Output)\u003c\/li\u003e\n\u003cli\u003eMaximum Input Level +14 dBV\u003c\/li\u003e\n\u003cli\u003eMaximum Output Level +14 dBu\u003c\/li\u003e\n\u003cli\u003eMaximum Gain 20 dB\u003c\/li\u003e\n\u003cli\u003eFrequency Response 20 , 20 kHz\u003c\/li\u003e\n\u003cli\u003eTotal Harmonic Distortion \u0026lt;0.01%\u003c\/li\u003e\n\u003cli\u003eSignal to Noise Ratio \u0026gt; 90dB (ref 0 dBu)\u003c\/li\u003e\n\u003cli\u003ePower Requirements 12 V DC\u003c\/li\u003e\n\u003cli\u003eDimensions (LWH) 4.1″ x 4.6″x 1.85″, 104 cm x 117 cm x 47cm\u003c\/li\u003e\n\u003cli\u003eWeight 1.3 lbs (0.61kg)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eShop the ART HeadAmp 4 and more ART Pro Audio gear at SixStarPSL.\u003c\/p\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":67676703719698,"sku":"HEADAMP4","price":99.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0379\/2529\/0029\/files\/lg_headamp4-front.jpg?v=1794425818"},{"product_id":"art-hp-1-hp-1","title":"ART HP-1, Battery Powered Clip On Headphone Amplifier","description":"\u003ch2\u003eART HP-1 Battery Powered Clip On Headphone Amplifier\u003c\/h2\u003e\u003cp\u003eThe HP-1 is a compact, battery powered headphone amplifier for players who prefer a wired connection for their in ear monitors.\u003c\/p\u003e\u003cp\u003eIt features a locking Combo input for XLR and 1\/4 TRS connections, and an 1\/8 headphone output with a volume control. The HP-1 is switchable for mono or stereo operation, and provides over 40 hours of performance from two AA batteries.\u003c\/p\u003e\u003cp\u003eWith a rugged enclosure and heavy duty jacks, the HP-1 is built to withstand the rigors of the road and deliver clear, powerful, reliable sound.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLocking Combo Input Jack\u003c\/li\u003e\n\u003cli\u003eBalanced Mono \/ Unbalanced Stereo Switch\u003c\/li\u003e\n\u003cli\u003e1\/8\" Headphone Output\u003c\/li\u003e\n\u003cli\u003eOver 40 Hours of Battery Life (2x AA)\u003c\/li\u003e\n\u003cli\u003eBattery Status LED\u003c\/li\u003e\n\u003cli\u003eSturdy Belt Clip\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eInputs 1\/4\" \/XLR combo jack\u003c\/li\u003e\n\u003cli\u003eOutputs 3.5mm Jack (1\/8\")\u003c\/li\u003e\n\u003cli\u003eInput Impedance 5K Ω\u003c\/li\u003e\n\u003cli\u003eMaximum Output Level 105mW @ 0.1% THD\u003c\/li\u003e\n\u003cli\u003eMaximum Gain +9 dB\u003c\/li\u003e\n\u003cli\u003eTotal Harmonic Distortion ≤ .02% @1kHz Typical.\u003c\/li\u003e\n\u003cli\u003ePower Requirements 2-AA batteries Included\u003c\/li\u003e\n\u003cli\u003eDimensions (LWH) 1.6\" x 72\" x 5.4, (4.6 cm x 13.7 cm × 43.cm ).\u003c\/li\u003e\n\u003cli\u003eWeight 0.51 lbs. \/ 0.23kg\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eShop the ART HP-1 and more ART Pro Audio gear at SixStarPSL.\u003c\/p\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":67676703752466,"sku":"HP-1","price":74.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0379\/2529\/0029\/files\/lg_hp-1-angle.jpg?v=1794425820"},{"product_id":"art-mymonitor-ii-mymonitorii","title":"ART MyMonitor II, Personal Headphone Monitor Mixer","description":"\u003ch2\u003eART MyMonitor II Personal Headphone Monitor Mixer\u003c\/h2\u003e\u003cp\u003eThe MyMonitor II is a solution for musicians who want precise control of their headphone mix on stage or in the studio.\u003c\/p\u003e\u003cp\u003eConnect the MyMonitor II between your microphone and the PA system, then dial in the perfect blend of your mic, an instrument input, and a monitor signal from the mixing console. It features both 1\/4 and 1\/8 headphone outputs so you never have to hunt for an adapter.\u003c\/p\u003e\u003cp\u003eThe XLR connections will pass phantom power for use with active microphones, and the switchable mute will silence the mic without any pops. The instrument input is switchable between line and instrument levels, and Thru jacks send your signals on to the PA system.\u003c\/p\u003e\u003cp\u003eThe MyMonitor II can be powered by the included DC adapter or a 9V battery.\u003c\/p\u003e\u003cp\u003eNo monitor engineer? No problem.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBlend a Mic, Instrument, and Stereo Monitor Source\u003c\/li\u003e\n\u003cli\u003eMicrophone Input and Thru with Pop Free Mute Switch\u003c\/li\u003e\n\u003cli\u003eXLR Connections Pass Phantom Power for Active Mics\u003c\/li\u003e\n\u003cli\u003eInstrument \/ Line Input and Thru Jacks\u003c\/li\u003e\n\u003cli\u003e1\/4\" and 1\/8\" Stereo Headphone Outputs\u003c\/li\u003e\n\u003cli\u003e9V Battery and 12V DC Operation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eInputs XLR, 1\/4\"\u003c\/li\u003e\n\u003cli\u003eOutputs XLR, 1\/4\"\u003c\/li\u003e\n\u003cli\u003eInput Impedance 4.5k Ω (Mic), 1m Ω (Instrument), 100k Ω (Stereo Monitor, lLne)\u003c\/li\u003e\n\u003cli\u003eOutput Impedance 47 Ω (ea. Headphone Output)\u003c\/li\u003e\n\u003cli\u003eMaximum Input Level +6 dBu (Mic), +12 dBu (Instrument), +32 dBu (lLne), \u0026gt;+32 dBu (Stereo Monitor)\u003c\/li\u003e\n\u003cli\u003eMaximum Output Level +12dBu (headphones)\u003c\/li\u003e\n\u003cli\u003eMaximum Gain 47 dB (Mic), 41 dB(Instrument), 21dB(Stereo Monitor, Line)\u003c\/li\u003e\n\u003cli\u003ePower Requirements 12VDC @ 150mA (Adaptor Included) or 9VDC Battery\u003c\/li\u003e\n\u003cli\u003eDimensions (LWH) 4.1″ x 4.6″ x 1.85″, 10.4cm x 4.7cm x 11.7cm\u003c\/li\u003e\n\u003cli\u003eWeight 1.10 lbs (0.50kg)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eShop the ART MyMonitor II and more ART Pro Audio gear at SixStarPSL.\u003c\/p\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":67676703785234,"sku":"MYMONITORII","price":145.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0379\/2529\/0029\/files\/lg_mymonitor2-front.jpg?v=1794425822"},{"product_id":"art-cx311-cx311","title":"ART CX311, 2 Way Stereo Crossover with Subwoofer Output","description":"\u003ch2\u003eART CX311 2 Way Stereo Crossover with Subwoofer Output\u003c\/h2\u003e\u003cp\u003eThe CX311 is a stereo 2-way crossover with a dedicated subwoofer section.\u003c\/p\u003e\u003cp\u003eIt features Linkwitz Riley filters to guarantee in phase outputs at all frequencies. This ensures proper acoustic summing of common signals from adjacent drivers in the crossover region.\u003c\/p\u003e\u003cp\u003eEach channel has discrete controls for low and high output levels, a variable crossover frequency from 250 Hz to 6 kHz, a switchable low cut filter to eliminate rumble, and a switchable phase invert.\u003c\/p\u003e\u003cp\u003eBoth input channels are combined in the subwoofer section, where you can set the frequency below which the summed signal is sent to the subwoofer output.\u003c\/p\u003e\u003cp\u003eThe rear panel has XLR and 1\/4 TRS connections for the inputs, and 1\/4 TRS connections for all outputs.\u003c\/p\u003e\u003cp\u003ePacked into a fully shielded 1U steel enclosure, the CX311 is an ideal crossover solution for stereo PA systems with a subwoofer.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2-Way Stereo Operation\u003c\/li\u003e\n\u003cli\u003e250 Hz - 6 kHz Crossover Range\u003c\/li\u003e\n\u003cli\u003eSubwoofer Section with Independent Level and Frequency Controls (50 Hz - 250 Hz)\u003c\/li\u003e\n\u003cli\u003eBalanced XLR and 1\/4\" TRS Inputs\u003c\/li\u003e\n\u003cli\u003eBalanced 1\/4\" TRS Outputs\u003c\/li\u003e\n\u003cli\u003eSwitchable 30 Hz Low Cut Filters and Phase Invert\u003c\/li\u003e\n\u003cli\u003e1U Rackmount\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eInput Connections 2x XLR, 2x 1\/4\" TRS (Balanced)\u003c\/li\u003e\n\u003cli\u003eOutput Connections 5x 1\/4\" TRS (Balanced)\u003c\/li\u003e\n\u003cli\u003eInput Impedance 100 kΩ\u003c\/li\u003e\n\u003cli\u003eOutput Impedance 220Ω\u003c\/li\u003e\n\u003cli\u003eMaximum Input Level +21 dBu\u003c\/li\u003e\n\u003cli\u003eMaximum Output Level +21 dBu\u003c\/li\u003e\n\u003cli\u003eFrequency Response 10 Hz - 40 kHz (+\/- 0.5 dB)\u003c\/li\u003e\n\u003cli\u003eCrossover Frequency Range 250 Hz - 6 kHz\u003c\/li\u003e\n\u003cli\u003eCrossover Filter Type Fourth Order Linkwitz Riley, 24 dB \/ Octave, State Variable\u003c\/li\u003e\n\u003cli\u003eSubwoofer Filter Type Two Pole Butterworth, 12 dB \/ Octave\u003c\/li\u003e\n\u003cli\u003eSubwoofer Frequency Range 50 Hz - 250 Hz\u003c\/li\u003e\n\u003cli\u003eDynamic Range \u0026gt;114 dB\u003c\/li\u003e\n\u003cli\u003eSignal to Noise Ratio \u0026gt;95 dB\u003c\/li\u003e\n\u003cli\u003eRef: 0 dBu 20 Hz - 20 kHz, Unweighted\u003c\/li\u003e\n\u003cli\u003eCMRR \u0026gt;75 dB (Typical @ 1 kHz)\u003c\/li\u003e\n\u003cli\u003eTotal Harmonic Distortion \u0026lt;0.01% (20 Hz - 20 kHz, 0 dBu)\u003c\/li\u003e\n\u003cli\u003ePower Requirements 110 - 125V AC, 50 - 60 Hz, 15W (USA)\u003c\/li\u003e\n\u003cli\u003eExport Units Configured for Country of Destination\u003c\/li\u003e\n\u003cli\u003eDimensions 1.75\" x 19\" x 5.5\"\u003c\/li\u003e\n\u003cli\u003e4.4 cm x 48.3 cm x 14 cm\u003c\/li\u003e\n\u003cli\u003eWeight 4.85 lbs \/ 2.2 kg\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eShop the ART CX311 and more ART Pro Audio gear at SixStarPSL.\u003c\/p\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":67676703883538,"sku":"CX311","price":154.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0379\/2529\/0029\/files\/lg_cx311-front.jpg?v=1794425822"},{"product_id":"art-eq341-eq341","title":"ART EQ341, Dual 15 Band Graphic EQ, 1U","description":"\u003ch2\u003eART EQ341 Dual 15 Band Graphic EQ, 1U\u003c\/h2\u003e\u003cp\u003eART 300-Series graphic equalizers are designed for live sound, studio, and installation audio applications to provide intuitive sound shaping, versatile features, and silent operation.\u003c\/p\u003e\u003cp\u003eThe EQ341 is a dual channel 15-band EQ. Each channel has an independently switchable range of 6 or 12 dB, master level control, and bypass switch to quickly compare the dry and processed signals.\u003c\/p\u003e\u003cp\u003eThe rear panel has balanced XLR, balanced 1\/4\" TRS, and unbalanced RCA connectors, so the EQ341 is easy to integrate into any system. It also features a ground lift switch to help eliminate hum.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDual 15-Band Graphic EQ\u003c\/li\u003e\n\u003cli\u003e20mm Sliders with Centre Detent\u003c\/li\u003e\n\u003cli\u003eSwitchable 6 dB or 12 dB Range\u003c\/li\u003e\n\u003cli\u003eMaster Level Controls\u003c\/li\u003e\n\u003cli\u003eBalanced XLR and 1\/4\" TRS Inputs and Outputs\u003c\/li\u003e\n\u003cli\u003eUnbalanced RCA Input and Output\u003c\/li\u003e\n\u003cli\u003e1U Rackmount\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eChannels 2\u003c\/li\u003e\n\u003cli\u003eBands per Channel 15 (2\/3 Octave, ISO Spacing)\u003c\/li\u003e\n\u003cli\u003eAccuracy +\/- 3% of Centre Frequency\u003c\/li\u003e\n\u003cli\u003eSliders 20 mm with Centre Detent\u003c\/li\u003e\n\u003cli\u003eRange +\/- 6 dB or +\/- 12 dB\u003c\/li\u003e\n\u003cli\u003eInputs 2x Balanced XLR and 1\/4\"\u003c\/li\u003e\n\u003cli\u003e2x Unbalanced RCA\u003c\/li\u003e\n\u003cli\u003eInput Impedance 20 kΩ (Balanced)\u003c\/li\u003e\n\u003cli\u003e15 kΩ (Unbalanced)\u003c\/li\u003e\n\u003cli\u003eMaximum Input Level +22 dBm (Level Control at Centre)\u003c\/li\u003e\n\u003cli\u003eOutputs 2x Balanced XLR and 1\/4\"\u003c\/li\u003e\n\u003cli\u003e2x Unbalanced RCA\u003c\/li\u003e\n\u003cli\u003eOutput Impedance Level \u0026lt;150Ω (Typical)\u003c\/li\u003e\n\u003cli\u003eFrequency Response 20 Hz to 20 kHz (+\/- 0.5 dB)\u003c\/li\u003e\n\u003cli\u003eSignal to Noise Ratio -94 dB\u003c\/li\u003e\n\u003cli\u003eTotal Harmonic Distortion 0.01%\u003c\/li\u003e\n\u003cli\u003eChannel Separation \u0026gt;50 dB\u003c\/li\u003e\n\u003cli\u003eOverload LED Threshold 6 dB below Clipping (All Filters Flat)\u003c\/li\u003e\n\u003cli\u003eDimensions (HWD) 1.75\" x 19\" x 5.5\"\u003c\/li\u003e\n\u003cli\u003e4.4cm x 48.3 x 14 cm\u003c\/li\u003e\n\u003cli\u003eWeight 4.85 lbs. \/ 2.2 kg\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eShop the ART EQ341 and more ART Pro Audio gear at SixStarPSL.\u003c\/p\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":67676703916306,"sku":"EQ341","price":159.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0379\/2529\/0029\/files\/lg_EQ-341-front.jpg?v=1794425823"},{"product_id":"art-eq351-eq351","title":"ART EQ351, Single 31 Band Graphic EQ, 1U","description":"\u003ch2\u003eART EQ351 Single 31 Band Graphic EQ, 1U\u003c\/h2\u003e\u003cp\u003eART 300-Series graphic equalizers are designed for live sound, studio, and installation audio applications to provide intuitive sound shaping, versatile features, and silent operation.\u003c\/p\u003e\u003cp\u003eThe EQ351 is a single channel 31-band EQ with a switchable range of 6 or 12 dB, for subtle shaping or dramatic sculpting of your sound. The high pass and low pass filters can quickly dial in the optimal bass and treble response, and the bypass control lets you compare the dry and processed signals for easy reference.\u003c\/p\u003e\u003cp\u003eThe rear panel has balanced XLR, balanced 1\/4 TRS, and unbalanced RCA connectors, so the EQ351 is easy to integrate into any system. It also features a ground lift switch to help eliminate hum.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e31-Band Graphic EQ\u003c\/li\u003e\n\u003cli\u003e20mm Sliders with Centre Detent\u003c\/li\u003e\n\u003cli\u003eSwitchable 6 dB or 12 dB Range\u003c\/li\u003e\n\u003cli\u003eVariable High Pass and Low Pass Filters\u003c\/li\u003e\n\u003cli\u003eMaster Level Controls\u003c\/li\u003e\n\u003cli\u003eBalanced XLR and 1\/4\" TRS Inputs and Outputs\u003c\/li\u003e\n\u003cli\u003eUnbalanced RCA Input and Output\u003c\/li\u003e\n\u003cli\u003e1U Rackmount\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eChannels 1\u003c\/li\u003e\n\u003cli\u003eBands per Channel 31 (1\/3 Octave, ISO Spacing)\u003c\/li\u003e\n\u003cli\u003eAccuracy +\/- 3% of Centre Frequency\u003c\/li\u003e\n\u003cli\u003eSliders 20 mm with Centre Detent\u003c\/li\u003e\n\u003cli\u003eRange +\/- 6 dB or +\/- 12 dB\u003c\/li\u003e\n\u003cli\u003eInputs Balanced XLR and 1\/4\"\u003c\/li\u003e\n\u003cli\u003eUnbalanced RCA\u003c\/li\u003e\n\u003cli\u003eInput Impedance 20 kΩ (Balanced)\u003c\/li\u003e\n\u003cli\u003e15 kΩ (Unbalanced)\u003c\/li\u003e\n\u003cli\u003eMaximum Input Level +22 dBm (Level Control at Centre)\u003c\/li\u003e\n\u003cli\u003eOutputs Balanced XLR and 1\/4\"\u003c\/li\u003e\n\u003cli\u003eUnbalanced RCA\u003c\/li\u003e\n\u003cli\u003eOutput Impedance Level \u0026lt;150Ω (Typical)\u003c\/li\u003e\n\u003cli\u003eFrequency Response 20 Hz to 20 kHz (+\/- 0.5 dB)\u003c\/li\u003e\n\u003cli\u003eSignal to Noise Ratio -94 dB\u003c\/li\u003e\n\u003cli\u003eTotal Harmonic Distortion 0.01%\u003c\/li\u003e\n\u003cli\u003eHigh Pass Filter 10 Hz - 250 Hz (12 dB per Octave)\u003c\/li\u003e\n\u003cli\u003eLow Pass Filter 3 kHz - 40 kHz (12 dB per Octave)\u003c\/li\u003e\n\u003cli\u003eOverload LED Threshold 6 dB below Clipping (All Filters Flat)\u003c\/li\u003e\n\u003cli\u003eDimensions (HWD) 1.75\" x 19\" x 5.5\"\u003c\/li\u003e\n\u003cli\u003e4.4cm x 48.3 x 14 cm\u003c\/li\u003e\n\u003cli\u003eWeight 4.5 lbs \/ 2.5 kg\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eShop the ART EQ351 and more ART Pro Audio gear at SixStarPSL.\u003c\/p\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":67676703949074,"sku":"EQ351","price":159.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0379\/2529\/0029\/files\/lg_eq351-front.jpg?v=1794425824"},{"product_id":"art-eq355-eq355","title":"ART EQ355, Dual 31 Band Graphic EQ, 2U","description":"\u003ch2\u003eART EQ355 Dual 31 Band Graphic EQ, 2U\u003c\/h2\u003e\u003cp\u003eART 300-Series graphic equalizers are designed for live sound, studio, and installation audio applications to provide intuitive sound shaping, versatile features, and silent operation.\u003c\/p\u003e\u003cp\u003eThe EQ355 is a dual channel EQ with 31 bands per channel. Each channel has an independently switchable range of 6 or 12 dB, variable high pass and low pass filters, master level control, and bypass switch to quickly compare the dry and processed signals.\u003c\/p\u003e\u003cp\u003eThe rear panel has balanced XLR, balanced 1\/4 TRS, and unbalanced RCA connectors, so the EQ355 is easy to integrate into any system. It also features a ground lift switch to help eliminate hum.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDual 31-Band Graphic EQ\u003c\/li\u003e\n\u003cli\u003e20mm Sliders with Centre Detent\u003c\/li\u003e\n\u003cli\u003eSwitchable 6 dB or 12 dB Range\u003c\/li\u003e\n\u003cli\u003eVariable High Pass and Low Pass Filters\u003c\/li\u003e\n\u003cli\u003eMaster Level Controls\u003c\/li\u003e\n\u003cli\u003eBalanced XLR and 1\/4\" TRS Inputs and Outputs\u003c\/li\u003e\n\u003cli\u003eUnbalanced RCA Input and Output\u003c\/li\u003e\n\u003cli\u003e2U Rackmount\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eChannels 2\u003c\/li\u003e\n\u003cli\u003eBands per Channel 31 (1\/3 Octave, ISO Spacing)\u003c\/li\u003e\n\u003cli\u003eAccuracy +\/- 3% of Centre Frequency\u003c\/li\u003e\n\u003cli\u003eSliders 20 mm with Centre Detent\u003c\/li\u003e\n\u003cli\u003eRange +\/- 6 dB or +\/- 12 dB\u003c\/li\u003e\n\u003cli\u003eInputs 2x Balanced XLR and 1\/4\"\u003c\/li\u003e\n\u003cli\u003e2x Unbalanced RCA\u003c\/li\u003e\n\u003cli\u003eInput Impedance 20 kΩ (Balanced)\u003c\/li\u003e\n\u003cli\u003e15 kΩ (Unbalanced)\u003c\/li\u003e\n\u003cli\u003eMaximum Input Level +22 dBm (Level Control at Centre)\u003c\/li\u003e\n\u003cli\u003eOutputs 2x Balanced XLR and 1\/4\"\u003c\/li\u003e\n\u003cli\u003e2x Unbalanced RCA\u003c\/li\u003e\n\u003cli\u003eOutput Impedance Level \u0026lt;150Ω (Typical)\u003c\/li\u003e\n\u003cli\u003eFrequency Response 20 Hz to 20 kHz (+\/- 0.5 dB)\u003c\/li\u003e\n\u003cli\u003eSignal to Noise Ratio -94 dB\u003c\/li\u003e\n\u003cli\u003eTotal Harmonic Distortion 0.01%\u003c\/li\u003e\n\u003cli\u003eHigh Pass Filter 10 Hz - 250 Hz (12 dB per Octave)\u003c\/li\u003e\n\u003cli\u003eLow Pass Filter 3 kHz - 40 kHz (12 dB per Octave)\u003c\/li\u003e\n\u003cli\u003eOverload LED Threshold 6 dB below Clipping (All Filters Flat)\u003c\/li\u003e\n\u003cli\u003eDimensions (HWD) 3.5\" x 19\" x 7\u003c\/li\u003e\n\u003cli\u003e8.9 cm x 48.3 cm x 17.8 cm)\u003c\/li\u003e\n\u003cli\u003eWeight 9.0 lbs \/ 4.1 kg\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eShop the ART EQ355 and more ART Pro Audio gear at SixStarPSL.\u003c\/p\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":67676703981842,"sku":"EQ355","price":279.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0379\/2529\/0029\/files\/lg_eq355-front.jpg?v=1794425827"},{"product_id":"art-sla1-sla1","title":"ART SLA1, 2 Channel Studio Power Amplifier, 2 x 100W at 8 Ohms","description":"\u003ch2\u003eART SLA1 2 Channel Studio Power Amplifier, 2 x 100W at 8 Ohms\u003c\/h2\u003e\u003cp\u003eThe SLA1 is a two channel linear power amplifier designed for passive studio monitors.\u003c\/p\u003e\u003cp\u003eIt delivers 100 watts per channel at 8 ohms and 130 watts per channel at 4 ohms. It can also be bridged for up to 260 watts into a single 8 ohm load. The SLA1 offers a wide frequency response of 10 Hz to 40 kHz (+\/- 0.5 dB) with ultra low noise and distortion to deliver the full fidelity of your source material.\u003c\/p\u003e\u003cp\u003eEach channel has an independent volume control and status LEDs to indicate signal activity, clipping, and thermal protection. The rear panel has balanced XLR and 1\/4\" TRS inputs, and binding post outputs for bare wire, banana plug, or spade connectors.\u003c\/p\u003e\u003cp\u003eThe SLA1 also incorporates our SmartFan system that adjusts the fan speed based on the internal ambient temperature for advanced cooling and quiet operation.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2-Channel Class D Power Amplifier\u003c\/li\u003e\n\u003cli\u003e140 W per Channel, 400 W Bridged (8Ω)\u003c\/li\u003e\n\u003cli\u003e280 W Bridged (70 V)\u003c\/li\u003e\n\u003cli\u003eXLR and 1\/4\" TRS Inputs\u003c\/li\u003e\n\u003cli\u003eBinding Post Outputs\u003c\/li\u003e\n\u003cli\u003e20 Hz - 20 kHz Frequency Response (+\/- 0.5 dB)\u003c\/li\u003e\n\u003cli\u003e1U Rackmount\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStereo Output Power 260 W RMS Mono\u003c\/li\u003e\n\u003cli\u003eFrequency Response (Hz CM +\/- 1dB) 10Hz to 40kHz, +\/- .5dB\u003c\/li\u003e\n\u003cli\u003eHum and Noise (un \/ Aweighted -dB) \u0026gt; 100dB Below Cipping\u003c\/li\u003e\n\u003cli\u003eInput Impedance, Bal\/Unbal (Ohms) XLR: 44k Ω (Bal), 1\/4\": 22k Ω (Unbal)\u003c\/li\u003e\n\u003cli\u003eInput Sensitivity (Vrms) For Full Power Out 1V for Full Power Output into 8 Ω\u003c\/li\u003e\n\u003cli\u003eCMRR AT 60Hz (min\/typ) \u0026gt; 60dB (Typical @1kHz)\u003c\/li\u003e\n\u003cli\u003eInputs, XLR Yes\u003c\/li\u003e\n\u003cli\u003eInputs - 1\/4 IN Jacks TRS (Bal\/Unbal)\u003c\/li\u003e\n\u003cli\u003eOutputs, Binding Post Multi Way\u003c\/li\u003e\n\u003cli\u003eRack Spaces 1U\u003c\/li\u003e\n\u003cli\u003eTransformer Type Toroidal\u003c\/li\u003e\n\u003cli\u003eDimensions 9.5\" x 19.0\" x 1.75\"\u003c\/li\u003e\n\u003cli\u003eDimensions (DWH \/D fm ears cm) 24.3 cm x 25.4 cm x 4.4 cm x\u003c\/li\u003e\n\u003cli\u003eWeight (lbs \/ kg) 13.2 lbs\/6.0kg.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eShop the ART SLA1 and more ART Pro Audio gear at SixStarPSL.\u003c\/p\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":67676704014610,"sku":"SLA1","price":299.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0379\/2529\/0029\/files\/lg_SLA1-front.jpg?v=1794425831"},{"product_id":"art-sla2-sla2","title":"ART SLA2, 2 Channel Studio Power Amplifier, 2 x 200W at 8 Ohms","description":"\u003ch2\u003eART SLA2 2 Channel Studio Power Amplifier, 2 x 200W at 8 Ohms\u003c\/h2\u003e\u003cp\u003eThe SLA2 is the most powerful amplifier from ART: a two channel linear power amp designed for passive studio monitors, with the versatility and volume for live and commercial applications.\u003c\/p\u003e\u003cp\u003eIt delivers 200 watts per channel at 8 ohms and 280 watts per channel at 4 ohms. It can also be bridged for up to 560 watts into a single 8 ohm load. The SLA2 offers a wide frequency response of 10 Hz - 40 kHz (+\/- 0.5 dB) with ultra low noise and distortion to deliver the full fidelity of your source material.\u003c\/p\u003e\u003cp\u003eEach channel has an independent volume control and status LEDs to indicate signal activity, clipping, and thermal protection. The rear panel has balanced XLR and 1\/4 TRS inputs, Euroblock inputs, and binding post outputs for bare wire, banana plug, or spade connectors.\u003c\/p\u003e\u003cp\u003eThe SLA2 also incorporates our SmartFan system that adjusts the fan speed based on the internal ambient temperature for advanced cooling and quiet operation.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2-Channel Linear Power Amplifier\u003c\/li\u003e\n\u003cli\u003e200 W per Channel, 560 W Bridged (8Ω)\u003c\/li\u003e\n\u003cli\u003eXLR, 1\/4\" TRS, and Euroblock Inputs\u003c\/li\u003e\n\u003cli\u003eBinding Post Outputs\u003c\/li\u003e\n\u003cli\u003e10 Hz - 40 kHz Frequency Response (+\/- 0.5 dB)\u003c\/li\u003e\n\u003cli\u003eSmartFan Adaptive Cooling System\u003c\/li\u003e\n\u003cli\u003e1U Rackmount\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStereo Output Power Stereo Output Power, 4 Ω: 280 W RMS per channel\u003c\/li\u003e\n\u003cli\u003eStereo Output Power, 8 Ω: 200 W RMS per channel\u003c\/li\u003e\n\u003cli\u003eInput\/Output Connections XLR, Euroblock (bal), 1\/4″ TRS (bal\/unbal)\u003c\/li\u003e\n\u003cli\u003eFrequency Response (Hz CM +\/- 1dB) 10 Hz to 40 kHz, +\/- .5dB\u003c\/li\u003e\n\u003cli\u003eHum and Noise (un \/ Aweighted -dB) \u0026gt; 100 dB below clipping\u003c\/li\u003e\n\u003cli\u003eTHD -1kHz- 4 OHMS \u0026gt; 0.05% (typical)\u003c\/li\u003e\n\u003cli\u003eInput Impedance, Bal\/Unbal (Ohms) 44k Ω (bal), 22k Ω (unbal)\u003c\/li\u003e\n\u003cli\u003eInput Sensitivity (Vrms) For Full Power Out 1 V for full power output\u003c\/li\u003e\n\u003cli\u003eCMRR AT 60Hz (min\/typ) \u0026gt; 60 dB (typical @ 1 kHz)\u003c\/li\u003e\n\u003cli\u003eStereo \/ Mono \/ Bridge )S\/M\/B) Bridged Output Power, 8 Ω: 560 W MONO\u003c\/li\u003e\n\u003cli\u003eTransformer Type Toroidal\u003c\/li\u003e\n\u003cli\u003eDimensions 1.75″ x 19″ x 13.5″ (4.45 cm x 48.26 cm x 34.29 cm)\u003c\/li\u003e\n\u003cli\u003eWeight (lbs \/ kg) 19.8 lbs \/ 9 kg\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eShop the ART SLA2 and more ART Pro Audio gear at SixStarPSL.\u003c\/p\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":67676704047378,"sku":"SLA2","price":449.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0379\/2529\/0029\/files\/lg_SLA2-front.jpg?v=1794425830"},{"product_id":"art-sla4-sla4","title":"ART SLA4, 4 Channel Studio Power Amplifier, 4 x 100W at 8 Ohms","description":"\u003ch2\u003eART SLA4 4 Channel Studio Power Amplifier, 4 x 100W at 8 Ohms\u003c\/h2\u003e\u003cp\u003eThe SLA4 is the most versatile power amplifier from ART: a four channel linear amp designed to drive multiple sets of studio monitors, with the versatility and volume for live and commercial applications.\u003c\/p\u003e\u003cp\u003eIt delivers 100 watts per channel at 8 ohms and 140 watts per channel at 4 ohms. Both pairs of channels can be independently bridged for up to 280 watts at 8 ohms. The SLA2 offers a wide frequency response of 10 Hz - 40 kHz (+\/- 0.5 dB) with ultra low noise and distortion to deliver the full fidelity of your source material.\u003c\/p\u003e\u003cp\u003eEach channel has an independent volume control and status LEDs to indicate signal activity, clipping, and thermal protection. The rear panel has balanced XLR and 1\/4 TRS inputs, Euroblock inputs, and binding post outputs for bare wire, banana plug, or spade connectors.\u003c\/p\u003e\u003cp\u003eThe SLA4 also incorporates our SmartFan system that adjusts the fan speed based on the internal ambient temperature for advanced cooling and quiet operation.\u003c\/p\u003e\u003cp\u003eWhether you need to drive two pairs of monitors, two bridged output pairs for high power stereo, or a multi zone system, the SLA4 offers fidelity, flexibility, and durability.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e4-Channel Linear Power Amplifier\u003c\/li\u003e\n\u003cli\u003e100 W per Channel, 280 W Bridged (8Ω)\u003c\/li\u003e\n\u003cli\u003eEuroblock Inputs\u003c\/li\u003e\n\u003cli\u003eBinding Post Outputs\u003c\/li\u003e\n\u003cli\u003e10 Hz - 40 kHz Frequency Response (+\/- 0.5 dB)\u003c\/li\u003e\n\u003cli\u003eSmartFan Adaptive Cooling System\u003c\/li\u003e\n\u003cli\u003e1U Rackmount\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStereo Output Power Stereo Output Power, 4 Ω: 4 x 140 W\/Channel RMS\u003c\/li\u003e\n\u003cli\u003eStereo Output Power, 8 Ω: 4 x 100W \/Channel RMS\u003c\/li\u003e\n\u003cli\u003eMinimum Load Impedance Mono 4 Ω (Bridged)\u003c\/li\u003e\n\u003cli\u003eMinimum Load Impedance Stereo 2 Ω (Stereo)\u003c\/li\u003e\n\u003cli\u003eInput\/Output Connections 1\/4\" TRS\/Euroblock (Input) \/ Multi Way Binding\u003c\/li\u003e\n\u003cli\u003eFrequency Response (Hz CM +\/- 1dB) 10 Hz to 40 kHz, +\/- 0.5 dB\u003c\/li\u003e\n\u003cli\u003eHum and Noise (un \/ Aweighted -dB) \u0026gt; 100dB below clipping\u003c\/li\u003e\n\u003cli\u003eSlew Rate (V\/uS) \u0026gt; 20V\/uS\u003c\/li\u003e\n\u003cli\u003eInput Impedance, Bal\/Unbal (Ohms) 44k Ω (balanced) \/ 22k Ω (unbalanced)\u003c\/li\u003e\n\u003cli\u003eInput Sensitivity (Vrms) For Full Power Out 1V for full power output into 8 Ω\u003c\/li\u003e\n\u003cli\u003eCMRR AT 60Hz (min\/typ) \u0026gt; 60 dB (typical @1 kHz)\u003c\/li\u003e\n\u003cli\u003eStereo \/ Bridge (S\/B) Bridged Output Power, 16 Ω: 2 x 200W\/Channel RMS\u003c\/li\u003e\n\u003cli\u003eBridged Output Power, 8 Ω: 2 x 280W\/Channel RMS\u003c\/li\u003e\n\u003cli\u003eTransformer Type Toroidal\u003c\/li\u003e\n\u003cli\u003eOther Features Minimum Load Impedance, Mono 4 Ω (Bridged)\u003c\/li\u003e\n\u003cli\u003eMinimum Load Impedance, Stereo 2 Ω (Stereo)\u003c\/li\u003e\n\u003cli\u003eDimensions 1.75″ x 19″ x 13.5″ (4.45 cm x 48.3 cm x 19.05 cm\u003c\/li\u003e\n\u003cli\u003eWeight (lbs \/ kg) 19.8 lbs \/ 9.0 kg\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eShop the ART SLA4 and more ART Pro Audio gear at SixStarPSL.\u003c\/p\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":67676704178450,"sku":"SLA4","price":469.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0379\/2529\/0029\/files\/lg_SLA4-front.jpg?v=1794425832"},{"product_id":"art-hva1-hva1","title":"ART HVA1, 2 Channel 70V\/100V Installation Amplifier, 2 x 135W","description":"\u003ch2\u003eART HVA1 2 Channel 70V\/100V Installation Amplifier, 2 x 135W\u003c\/h2\u003e\u003cp\u003eThe HVA1 is a two channel Class D amplifier for 70V and 100V installations that delivers 135 watts per channel.\u003c\/p\u003e\u003cp\u003eEach channel has an independent volume control and status LEDs to indicate signal activity, clipping, and thermal protection.\u003c\/p\u003e\u003cp\u003eWith a robust feature set in a 1U rackmount enclosure, the HVA1 offers a built in limiter, an internal fan, and Euroblock connectors for audio, status, and control signals.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2-Channel Class D Power Amplifier\u003c\/li\u003e\n\u003cli\u003eSwitchable 70 V \/ 100 V Operation\u003c\/li\u003e\n\u003cli\u003e135 W per Channel\u003c\/li\u003e\n\u003cli\u003eEuroblock Connectors\u003c\/li\u003e\n\u003cli\u003eBuilt In Limiter\u003c\/li\u003e\n\u003cli\u003eShort Circuit, Thermal, and Power On \/ Off Muting Protection\u003c\/li\u003e\n\u003cli\u003e1U Rackmount\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAmplifier class Switching power, Class D\u003c\/li\u003e\n\u003cli\u003eInput\/Output Connections Euroblock\u003c\/li\u003e\n\u003cli\u003eFrequency Response (Hz CM +\/- 1dB) 120 Hz - 17 kHz (-3dB)\u003c\/li\u003e\n\u003cli\u003eTHD \u0026lt;0.1%\u003c\/li\u003e\n\u003cli\u003eDamping Factor (30 Hz - 400 Hz AT 8 Ohms) \u0026gt;200\u003c\/li\u003e\n\u003cli\u003eCrosstalk (1kHz \/ 20Hz-20kHz) \u0026gt;70 dB\u003c\/li\u003e\n\u003cli\u003eInput Impedance, Bal\/Unbal (Ohms) 20 k Ω (balanced) 10 k Ω (unbalanced)\u003c\/li\u003e\n\u003cli\u003eInput Sensitivity (Vrms) For Full Power Out 0.9-1.1 V ( 0+\/-1 dBV )\u003c\/li\u003e\n\u003cli\u003eProtection Short circuit, open circuit, thermal, ultrasonic and RF\u003c\/li\u003e\n\u003cli\u003eOther Features Front: AC switch, Input level control for each channel\u003c\/li\u003e\n\u003cli\u003eRear: 70 V \/ 100 V selector\u003c\/li\u003e\n\u003cli\u003eDimensions 19.02\" x 1.73\" x 14.17\" 48.3 cm x 4.4 cm x 3.60 cm\u003c\/li\u003e\n\u003cli\u003eWeight (lbs \/ kg) 10.36 lbs \/ 4.7 kg\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eShop the ART HVA1 and more ART Pro Audio gear at SixStarPSL.\u003c\/p\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":67676704342290,"sku":"HVA1","price":579.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0379\/2529\/0029\/files\/lg_hva1-front.jpg?v=1794425836"},{"product_id":"art-hva4-hva4","title":"ART HVA4, 4 Channel 70V\/100V Installation Amplifier, 4 x 270W","description":"\u003ch2\u003eART HVA4 4 Channel 70V\/100V Installation Amplifier, 4 x 270W\u003c\/h2\u003e\u003cp\u003eThe HVA4 is a four channel Class D amplifier for 70V and 100V installations that delivers 270 watts per channel.\u003c\/p\u003e\u003cp\u003eEach channel has an independent volume control and status LEDs to indicate signal activity, clipping, and thermal protection.\u003c\/p\u003e\u003cp\u003eWith a robust feature set in a 1U rackmount enclosure, the HVA4 offers a built in limiter, an internal fan, and Euroblock connectors for audio, status, and control signals.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e4-Channel Class D Power Amplifier\u003c\/li\u003e\n\u003cli\u003eSwitchable 70 V \/ 100 V Operation\u003c\/li\u003e\n\u003cli\u003e270 W per Channel\u003c\/li\u003e\n\u003cli\u003eEuroblock Connectors\u003c\/li\u003e\n\u003cli\u003eBuilt In Limiter\u003c\/li\u003e\n\u003cli\u003eShort Circuit, Thermal, and Power On \/ Off Muting Protection\u003c\/li\u003e\n\u003cli\u003e1U Rackmount\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAmplifier class Switching power, Class D\u003c\/li\u003e\n\u003cli\u003eInput\/Output Connections Euroblock\u003c\/li\u003e\n\u003cli\u003eFrequency Response (Hz CM +\/- 1dB) 120 Hz - 17 kHz (-3dB)\u003c\/li\u003e\n\u003cli\u003eTHD \u0026lt;0.1%\u003c\/li\u003e\n\u003cli\u003eDamping Factor (30 Hz - 400 Hz AT 8 Ohms) \u0026gt;200\u003c\/li\u003e\n\u003cli\u003eCrosstalk (1kHz \/ 20Hz-20kHz) \u0026gt;70 dB\u003c\/li\u003e\n\u003cli\u003eInput Impedance, Bal\/Unbal (Ohms) 20 k Ω (balanced) 10 k Ω (unbalanced)\u003c\/li\u003e\n\u003cli\u003eInput Sensitivity (Vrms) For Full Power Out 0.9-1.1 V ( 0+\/-1 dBV )\u003c\/li\u003e\n\u003cli\u003eProtection Short circuit, open circuit, thermal, ultrasonic and RF\u003c\/li\u003e\n\u003cli\u003eOther Features Front: AC switch, Input level control for each channel\u003c\/li\u003e\n\u003cli\u003eRear: 70 V \/ 100 V selector\u003c\/li\u003e\n\u003cli\u003eDimensions 19.02\" x 1.73\" x 14.17\" 48.3 cm x 4.4 cm x 3.60 cm\u003c\/li\u003e\n\u003cli\u003eWeight (lbs \/ kg) 13.67 lbs \/ 6.2 kg\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eShop the ART HVA4 and more ART Pro Audio gear at SixStarPSL.\u003c\/p\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":67676704375058,"sku":"HVA4","price":999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0379\/2529\/0029\/files\/lg_HVA4-front.jpg?v=1794425836"},{"product_id":"art-mx225-mx225u","title":"ART MX225, Stereo Dual Source 5 Zone Distribution Mixer","description":"\u003ch2\u003eART MX225 Stereo Dual Source 5 Zone Distribution Mixer\u003c\/h2\u003e\u003cp\u003eThe MX225 is our most affordable zone mixer.\u003c\/p\u003e\u003cp\u003eIt has two pairs of stereo inputs, and both sources can be independently mixed for each of the fine zone outputs. Each zone features level controls for each source, switchable mono or stereo operation, and an LED meter with a clip indicator.\u003c\/p\u003e\u003cp\u003eAll inputs and outputs use balanced XLR connections, and the single space enclosure with built in power supply is easy to integrate into any rackmount system.\u003c\/p\u003e\u003cp\u003eFlexible and easy to use, the MX225 is a streamlined solution for distributed audio in restaurants, conference rooms, houses of worship, and more.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLeft and right balanced Source 1 and 2 Inputs, accepts stereo or mono signal sources\u003c\/li\u003e\n\u003cli\u003eSource 1 and 2 input channels are internally routed to all five Zone channels Five Zone channels each feature Source 1 and 2 level controls and left and right balanced output XLR connectors\u003c\/li\u003e\n\u003cli\u003eStereo\/Mono selector on each zone sums left and right into Mono mode when engaged\u003c\/li\u003e\n\u003cli\u003eMono indicator LED on each zone channel indicates that mono has been selected\u003c\/li\u003e\n\u003cli\u003eFive LED level metering (-25, -20, -15, -10, Clip) on each zone channel indicate signal activity for each zone\u003c\/li\u003e\n\u003cli\u003eSource 1 and 2 indicator LEDs show you when signal is present in each source channel\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eInputs 4x XLR\u003c\/li\u003e\n\u003cli\u003eOutputs 10x XLR\u003c\/li\u003e\n\u003cli\u003eInput Impedance 47k Ω\u003c\/li\u003e\n\u003cli\u003eOutput Impedance 200 Ω\u003c\/li\u003e\n\u003cli\u003eMaximum Input Level +20 dBu\u003c\/li\u003e\n\u003cli\u003eMaximum Output Level +24 dBu balanced\u003c\/li\u003e\n\u003cli\u003eMaximum Gain +6 dB\u003c\/li\u003e\n\u003cli\u003eTotal Harmonic Distortion .05% Typical\u003c\/li\u003e\n\u003cli\u003eSignal to Noise Ratio \u0026gt; 90dB typical\u003c\/li\u003e\n\u003cli\u003ePower Requirements USA , 105 to 125 VAC \/ 50-60Hz, 15 W typical\u003c\/li\u003e\n\u003cli\u003eDimensions (HWD) 1.75″ x 19″ x 7.25\" (4.45 cm x 48.3 cm x 18.4 cm)\u003c\/li\u003e\n\u003cli\u003eWeight 5.34 lbs \/ 2.42 kg\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eShop the ART MX225 and more ART Pro Audio gear at SixStarPSL.\u003c\/p\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":67676704407826,"sku":"MX225U","price":279.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0379\/2529\/0029\/files\/lg_mx225-front-new.jpg?v=1794425838"},{"product_id":"art-mx524-mx524","title":"ART MX524, 5 Channel 4 Zone Installation Mixer","description":"\u003ch2\u003eART MX524 5 Channel 4 Zone Installation Mixer\u003c\/h2\u003e\u003cp\u003eWith five input channels and four output zones, the MX524 is our most fully featured zone mixer.\u003c\/p\u003e\u003cp\u003eFour channels feature combo inputs for XLR or 1\/4\" connections, and switchable phantom power for condenser microphones. The fifth channel offers RCA line inputs.\u003c\/p\u003e\u003cp\u003eAll channels have controls for input gain and output level as well as two band EQ, and can be assigned to any or all of the zones. Each zone has an independent level control, and any combination of zones can be monitored by headphones or the line out terminals.\u003c\/p\u003e\u003cp\u003eWhen a signal is detected on the first input, the other channels will automatically lower in volume so that announcements can be clearly heard throughout a venue. Rear terminal connections also allow the connection of an auxiliary telephone signal for paging.\u003c\/p\u003e\u003cp\u003eFlexible and easy to use, the MX524 is an ideal solution for distributed audio in restaurants, conference rooms, houses of worship, and more.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFive input channels with individual level controls using XLR\/Phono jacks with master level, bass and treble controls\u003c\/li\u003e\n\u003cli\u003eBalanced Mic\/Line XLR inputs for channels one thru four\u003c\/li\u003e\n\u003cli\u003eFull +48V low noise phantom power for channels one thru four mic inputs\u003c\/li\u003e\n\u003cli\u003eFront panel 1\/8-inch stereo (TRS) mini phone plug for Headphone monitoring\u003c\/li\u003e\n\u003cli\u003eFour sets of Euro Bloc connectors for the Zone outputs\u003c\/li\u003e\n\u003cli\u003eTelephone paging function\u003c\/li\u003e\n\u003cli\u003eDC power back up\u003c\/li\u003e\n\u003cli\u003eSeparate monitor outputs\u003c\/li\u003e\n\u003cli\u003eLED VU meter on all outputs\u003c\/li\u003e\n\u003cli\u003eRear mount RCA Line inputs for additional audio inputs\u003c\/li\u003e\n\u003cli\u003eRugged 3U rack mount steel chassis with built in power supply\u003c\/li\u003e\n\u003cli\u003ePerfect for stage, studio and permanent installations\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eInputs XLR \/ 1\/4 Combo Jacks, RCA\u003c\/li\u003e\n\u003cli\u003eOutputs Euroblock, Screw terminals\u003c\/li\u003e\n\u003cli\u003eInput Impedance Microphone input: 1.4k Ω\u003c\/li\u003e\n\u003cli\u003eAll other inputs 10k Ω or greater\u003c\/li\u003e\n\u003cli\u003eOutput Impedance Zone outputs 120 Ω\u003c\/li\u003e\n\u003cli\u003eMonitor Speaker output 8 Ω\u003c\/li\u003e\n\u003cli\u003eMonitor Line output 120 Ω\u003c\/li\u003e\n\u003cli\u003eMaximum Gain 60 dB CH MIC. Input Main out (XLR, balanced)\u003c\/li\u003e\n\u003cli\u003e50 dB CH MIC. Input \u0026amp; REC. out (unbalanced) 60 dB CH MIC. Input Mono out (unbalanced)\u003c\/li\u003e\n\u003cli\u003eFrequency Response 20 Hz , 22 kHz (± 2 dBu)\u003c\/li\u003e\n\u003cli\u003eTotal Harmonic Distortion \u0026lt;0.03% @1 kHz\u003c\/li\u003e\n\u003cli\u003ePhantom Power 48 VDC\u003c\/li\u003e\n\u003cli\u003ePower Requirements 110~120 VAC 50\/60 Hz or 24 VDC\u003c\/li\u003e\n\u003cli\u003eDimensions (HWD) 5.1\" x 19\" x 7.5\" (13.0 cm x 48.3 cm x 19.1 cm)\u003c\/li\u003e\n\u003cli\u003eWeight 6.63 lbs. \/ 3.0 kg\u003c\/li\u003e\n\u003cli\u003eNote 0 dBu = 0.775Vrms\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eShop the ART MX524 and more ART Pro Audio gear at SixStarPSL.\u003c\/p\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":67676704440594,"sku":"MX524","price":389.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0379\/2529\/0029\/files\/lg_52ac9d0244bfeee5f81a3845c8e2c393.jpg?v=1794425841"},{"product_id":"art-mx822-mx822","title":"ART MX822, 8 Channel Stereo Mic and Line Mixer","description":"\u003ch2\u003eART MX822 8 Channel Stereo Mic and Line Mixer\u003c\/h2\u003e\u003cp\u003eThe MX822 is an eight channel stereo mixer with an effects loop, and the most fully featured rackmount line mixer from ART.\u003c\/p\u003e\u003cp\u003eEach channel has dual 1\/4\" unbalanced inputs for mono or stereo sources, and channel 1 also has a microphone input with a balanced XLR connection and switchable phantom power.\u003c\/p\u003e\u003cp\u003eAll channels have signal and clipping indicators, as well as controls for level, pan, and EFX send. The master section has controls for the main and headphone output levels, as well as the EFX return and LED metering.\u003c\/p\u003e\u003cp\u003eThe main outputs use balanced XLR connectors, and multiple units can be chained together using the Main Expand and EFX Buss Link jacks.\u003c\/p\u003e\u003cp\u003eVersatile, expandable, and with a fully stereo signal path, the MX822 is a powerful mixing solution for studio and stage use.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eEight stereo\/mono input channels with individual level, pan and effects send controls\u003c\/li\u003e\n\u003cli\u003eExternal effects loop with independent send and return controls\u003c\/li\u003e\n\u003cli\u003eFront panel 1\/4-inch stereo (TRS) headphone jack with amplifier and independent level control for output monitoring\u003c\/li\u003e\n\u003cli\u003eSwitchable balanced microphone XLR or 1\/4-inch inputs on Channel One\u003c\/li\u003e\n\u003cli\u003eSwitchable low noise +48V phantom power for microphone input\u003c\/li\u003e\n\u003cli\u003eSeparate green and red LED signal and clip indicators for each input channel\u003c\/li\u003e\n\u003cli\u003eSix level left and right main output metering including clip indicators\u003c\/li\u003e\n\u003cli\u003eBalanced left and right XLR main outputs\u003c\/li\u003e\n\u003cli\u003eMultiple units may be chained together for additional inputs\u003c\/li\u003e\n\u003cli\u003eRugged 1U rack mount steel case\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eInputs XLR female balanced (Mic)\u003c\/li\u003e\n\u003cli\u003e1\/4\" TS unbalanced (Channels 1-8, Effects Return)\u003c\/li\u003e\n\u003cli\u003e1\/4″ TRS stereo unbalanced (EFX Buss, Main Expand)\u003c\/li\u003e\n\u003cli\u003eOutputs XLR M balanced (Main) \u0026gt;br\u0026gt;1\/4″ TRS unbalanced (Effectss Send)\u003c\/li\u003e\n\u003cli\u003e1\/4″ TRS stereo unbalanced (Monitor, Main Expand, Headphone)\u003c\/li\u003e\n\u003cli\u003eInput Impedance 1k Ω (MIC), 5k Ω (Ch1-Ch8)\u003c\/li\u003e\n\u003cli\u003eOutput Impedance \u0026lt;1k Ω (Main, balanced), \u0026lt;25 Ω (Headphone)\u003c\/li\u003e\n\u003cli\u003eMaximum Input Level -19dBu (MIC), +24dBu (Ch1-8)\u003c\/li\u003e\n\u003cli\u003eMaximum Output Level +24dBu (Main), +18dBu (Monitor, Effects Send)\u003c\/li\u003e\n\u003cli\u003eMaximum Gain +60dB (MIC), +14dB (Ch1-8)\u003c\/li\u003e\n\u003cli\u003eTotal Harmonic Distortion \u0026lt;0.01% @ 1kHz\u003c\/li\u003e\n\u003cli\u003eSignal to Noise Ratio \u0026gt; 90dB typical (Ref 0dBu)\u003c\/li\u003e\n\u003cli\u003ePhantom Power Switch Selectable, +48V DC, filtered, current limited\u003c\/li\u003e\n\u003cli\u003ePower Requirements USA , 95 to 125 VAC, 50-60 Hz\u003c\/li\u003e\n\u003cli\u003eExport units configured for country of destination\u003c\/li\u003e\n\u003cli\u003eDimensions (HWD) 1.75″ x 19″ x 6″ (4.5cm x 48.3cm x 15.2cm)\u003c\/li\u003e\n\u003cli\u003eWeight 6.3 lbs \/ 2.95 kg\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eShop the ART MX822 and more ART Pro Audio gear at SixStarPSL.\u003c\/p\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":67676704473362,"sku":"MX822","price":245.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0379\/2529\/0029\/files\/lg_mx822-front-new.jpg?v=1794425845"},{"product_id":"art-powermix-iii-pwrmix-3","title":"ART PowerMix III, 3 Channel Stereo Mini Mixer","description":"\u003ch2\u003eART PowerMix III 3 Channel Stereo Mini Mixer\u003c\/h2\u003e\u003cp\u003eThe PowerMix III is a three channel line mixer.\u003c\/p\u003e\u003cp\u003eEach channel has dual 1\/4\" inputs that can accept mono or stereo sources, and controls for level and panning. There's a master level control for the main outputs, and a shared level control for the two headphone jacks.\u003c\/p\u003e\u003cp\u003eIt's a compact mixing and submixing solution for synths, sound modules, media players, and other line sources.\u003c\/p\u003e\u003cp\u003eShop the ART PowerMix III and more ART Pro Audio gear at SixStarPSL.\u003c\/p\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":67676704506130,"sku":"PWRMIX-3","price":149.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0379\/2529\/0029\/files\/lg_PWRMIX3-top.jpg?v=1794425844"},{"product_id":"art-promix-promix","title":"ART ProMix, 3 Channel XLR Mic Mini Mixer","description":"\u003ch2\u003eART ProMix 3 Channel XLR Mic Mini Mixer\u003c\/h2\u003e\u003cp\u003eThe ProMix is a three channel microphone mixer designed for connecting multiple mics to a larger mixer that only has a single input available.\u003c\/p\u003e\u003cp\u003eEach channel has an independent level control and switches to activate phantom power and a high pass filter. The mixed signal is sent to a 1\/4\" headphone \/ auxiliary output and a balanced XLR line output.\u003c\/p\u003e\u003cp\u003eFor additional flexibility, it can be powered by the included adapter or two 9-volt batteries for mobile applications.\u003c\/p\u003e\u003cp\u003eThe ProMix is a compact, convenient solution that can be used on its own in smaller setups, or to extend the connectivity of a larger system.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e3x low impedance XLR mic channels\u003c\/li\u003e\n\u003cli\u003e3x level controls\u003c\/li\u003e\n\u003cli\u003e3x phantom power on\/off DIP switches\u003c\/li\u003e\n\u003cli\u003e3x low frequency cut on\/off DIP switches\u003c\/li\u003e\n\u003cli\u003eA low impedance balanced XLR line output\u003c\/li\u003e\n\u003cli\u003eMono 1\/4\" Phones\/Aux. output\u003c\/li\u003e\n\u003cli\u003eClip LED (fires 3 dB below the onset of clipping)\u003c\/li\u003e\n\u003cli\u003eOn\/off Power switch,with LED\u003c\/li\u003e\n\u003cli\u003ePower:12 V DC (Adapter included)\u003c\/li\u003e\n\u003cli\u003eOutput Phantom Power:12V (Using the 12V DC supply)\u003c\/li\u003e\n\u003cli\u003eOptional 2 x 9V Battery Power (Yields 18V Phantom Power)Low Cut:-3dB @ 100Hz\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eInput Impedance 600 Ω\u003c\/li\u003e\n\u003cli\u003eOutput Impedance 600 Ω\u003c\/li\u003e\n\u003cli\u003eMaximum Input Level -14 dB\u003c\/li\u003e\n\u003cli\u003eMaximum Output Level +14 dB\u003c\/li\u003e\n\u003cli\u003eMaximum Gain +60 dB\u003c\/li\u003e\n\u003cli\u003eTotal Harmonic Distortion 0.0002\u003c\/li\u003e\n\u003cli\u003ePhantom Power 12V DC\u003c\/li\u003e\n\u003cli\u003ePower Requirements 12 V DC (adapter) \/ 2x 9V (batteries)\u003c\/li\u003e\n\u003cli\u003eDimensions (HWD) 5.63\" x 3.75\" x 1.75\" (14.3 cm x 9.2 cm x 4.5 cm)\u003c\/li\u003e\n\u003cli\u003eWeight 1.5lb \/ 6.8 kg)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eShop the ART ProMix and more ART Pro Audio gear at SixStarPSL.\u003c\/p\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":67676704538898,"sku":"PROMIX","price":184.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0379\/2529\/0029\/files\/lg_Pro-Mix-top.jpg?v=1794425846"},{"product_id":"art-splitmix4-splitmix4","title":"ART SplitMix4, Passive 4 Channel Stereo Mixer and Splitter","description":"\u003ch2\u003eART SplitMix4 Passive 4 Channel Stereo Mixer and Splitter\u003c\/h2\u003e\u003cp\u003e\"Its simplicity and relatively low cost belies the genius of its design. Highly recommended.\" - Sound On Sound\u003c\/p\u003e\u003cp\u003eThe SplitMix4 is a four channel line mixer, splitter, and level attenuator with a versatile hybrid design. Split one input to four outputs. Mix four inputs to one output. Send four stereo sources to their own stereo outputs with independent level controls. Or do any combination of the above.\u003c\/p\u003e\u003cp\u003eThe fully passive design means that there is no active circuitry to add noise or distortion, and that no power is required.\u003c\/p\u003e\u003cp\u003eAll connections are 1\/4\" stereo TRS with intelligent switching. Plugging into a mix input removes the channel from the splitter bus, and plugging into a splitter output removes the channel from the mix bus. Mono or stereo operation is determined by the cable you connect.\u003c\/p\u003e\u003cp\u003eCompact, rugged, and highly adaptable, the SplitMix4 will get your signals wherever they need to go on stage or in the studio.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFour Stereo Input Channels\u003c\/li\u003e\n\u003cli\u003eStereo Output\u003c\/li\u003e\n\u003cli\u003eIndependent stereo level controls are provided on each channel\u003c\/li\u003e\n\u003cli\u003ePassive Design (No Power Supply Required)\u003c\/li\u003e\n\u003cli\u003eOver 90dB of Attenuation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eInputs 1\/4\" TRS stereo\u003c\/li\u003e\n\u003cli\u003eOutputs 1\/4\" TRS stereo\u003c\/li\u003e\n\u003cli\u003eInput Impedance 25 k -100k Ω\u003c\/li\u003e\n\u003cli\u003eOutput Impedance 1 k , 4 k Ω\u003c\/li\u003e\n\u003cli\u003eFrequency Response 20 Hz , 20k Hz, +\/-1dB\u003c\/li\u003e\n\u003cli\u003eTotal Harmonic Distortion \u0026lt;0.005% @ 1 kHz (typical)\u003c\/li\u003e\n\u003cli\u003eChannel Separation \u0026gt; 90dB (typical)\u003c\/li\u003e\n\u003cli\u003ePower Requirements Fully Passive\u003c\/li\u003e\n\u003cli\u003eDimensions (HWD) 1.85″ x 4.6″ x 4.1″ (4.7 cm x 11.7 cm x 10.4 cm)\u003c\/li\u003e\n\u003cli\u003eWeight 0.84 lbs \/ 0.38 kg\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eShop the ART SplitMix4 and more ART Pro Audio gear at SixStarPSL.\u003c\/p\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":67676704571666,"sku":"SPLITMIX4","price":84.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0379\/2529\/0029\/files\/lg_850c554192978d5612e5acedef5bc660.jpg?v=1794425847"},{"product_id":"art-btdi-btdi","title":"ART BTDI, Bluetooth Direct Box","description":"\u003ch2\u003eART BTDI Bluetooth Direct Box\u003c\/h2\u003e\u003cp\u003eThe BT DI lets you connect Bluetooth® audio to a mixer, PA system, or audio interface.\u003c\/p\u003e\u003cp\u003eIt's a rugged unit with simple controls. Hold the Bluetooth button to pair or disconnect a device. A front panel switch selects between a fixed volume at the main outputs or variable adjustment with the Level knob, which also controls the monitor output.\u003c\/p\u003e\u003cp\u003eThe monitor output is switchable between mono and stereo operation, and supports headphone and line level connections. The Ground Lift on the rear panel can eliminate grounding noise when the BT DI is connected to a computer.\u003c\/p\u003e\u003cp\u003eThe XLR connections accept phantom power, so an external adaptor isn't required. The unit can also be powered over USB using bus power or a 5-volt 80 mA adapter (not included). With a range of up to 100 feet (30 metres), the BT DI makes it easy to integrate wireless audio into your sound system.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBluetooth® 5.0 Receiver\u003c\/li\u003e\n\u003cli\u003eUp to 100 ft \/ 30 m Range (Line of Sight)\u003c\/li\u003e\n\u003cli\u003eTransformer Isolated XLR Outputs\u003c\/li\u003e\n\u003cli\u003eLine \/ Headphone Monitor Out with Mono \/ Stereo Switch\u003c\/li\u003e\n\u003cli\u003eFixed or Variable Main Output Level\u003c\/li\u003e\n\u003cli\u003eLevel Control Adjusts Monitor or Main + Monitor Volume\u003c\/li\u003e\n\u003cli\u003eGround Lift\u003c\/li\u003e\n\u003cli\u003ePowered by USB or Phantom Power\u003c\/li\u003e\n\u003cli\u003eRugged Steel Case\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eActive or Passive Active\u003c\/li\u003e\n\u003cli\u003eInputs Bluetooth® Version 5.0\u003c\/li\u003e\n\u003cli\u003eClass 2 Device (BR \/ EDR)\u003c\/li\u003e\n\u003cli\u003eSupports SBC and AAC Codecs\u003c\/li\u003e\n\u003cli\u003eRange Up to 100 ft \/ 30 m Range (Line of Sight)\u003c\/li\u003e\n\u003cli\u003eOutputs 2x XLR\u003c\/li\u003e\n\u003cli\u003e1x 1\/4\" TRS Headphone \/ Line\u003c\/li\u003e\n\u003cli\u003eOutput Impedance 300Ω\u003c\/li\u003e\n\u003cli\u003eMaximum Output Level 0 dBu\u003c\/li\u003e\n\u003cli\u003eControls Bluetooth Pair, Level, Main \/ Monitor Switch, Monitor Mono \/ Stereo Switch, Ground Lift\u003c\/li\u003e\n\u003cli\u003eSignal to Noise Ratio -90 dB Unweighted (Typical)\u003c\/li\u003e\n\u003cli\u003eTotal Harmonic Distortion \u0026lt; 0.05% (Typical)\u003c\/li\u003e\n\u003cli\u003ePower Requirements USB (5V, 80 mA) or Phantom Power (Requires Connection of Both XLR Outputs)\u003c\/li\u003e\n\u003cli\u003eDimensions (HWD) 1.6\" x 5\" x 5.5\"\u003c\/li\u003e\n\u003cli\u003e3.6 cm x 12.6 cm x 14 cm\u003c\/li\u003e\n\u003cli\u003eWeight 2 lbs \/ 907 g\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eShop the ART BTDI and more ART Pro Audio gear at SixStarPSL.\u003c\/p\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":67676704604434,"sku":"BTDI","price":159.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0379\/2529\/0029\/files\/lg_BTDI-Front.jpg?v=1794425849"},{"product_id":"art-pdb4-pdb4","title":"ART PDB4, 4 Channel Passive Direct Box, 1U","description":"\u003ch2\u003eART PDB4 4 Channel Passive Direct Box, 1U\u003c\/h2\u003e\u003cp\u003eThe PDB4 is a four channel passive DI in a 1U rackmount format. It is ideal for connecting multiple unbalanced instrument, line, or speaker signals to balanced inputs.\u003c\/p\u003e\u003cp\u003eEach input signal is sent to a balanced, transformer isolated XLR output and a parallel Thru jack, so it can simultaneously be connected to an amplifier on stage.\u003c\/p\u003e\u003cp\u003eAll channels feature a switchable ground lift to help eliminate hum, and switchable attenuation with up to 40 dB of gain reduction to handle high signal levels.\u003c\/p\u003e\u003cp\u003eAs a fully passive design, the PDB4 doesn't require an external power source. Passive DIs are often a great match for powered sources such as synthesizers or guitars and basses with active preamps.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e4 Independent Channels\u003c\/li\u003e\n\u003cli\u003e1\/4\" TRS Inputs and Thru Connectors\u003c\/li\u003e\n\u003cli\u003eTransformer Isolated Balanced XLR Outputs\u003c\/li\u003e\n\u003cli\u003eSwitchable Ground Lift per Channel\u003c\/li\u003e\n\u003cli\u003eSwitchable Attenuation (0 dB, -20 dB, -40 dB) per Channel\u003c\/li\u003e\n\u003cli\u003ePassive Design, No Power Required\u003c\/li\u003e\n\u003cli\u003e1U Rackmount Enclosure\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eActive or Passive Passive\u003c\/li\u003e\n\u003cli\u003eInputs 4x 1\/4\" TRS\u003c\/li\u003e\n\u003cli\u003eOutputs 4x XLR\u003c\/li\u003e\n\u003cli\u003e4x 1\/4\" TRS Thru\u003c\/li\u003e\n\u003cli\u003eInput Impedance 50 kΩ\u003c\/li\u003e\n\u003cli\u003eOutput Impedance 600Ω\u003c\/li\u003e\n\u003cli\u003eControls Attenuator (0 dB, -20 dB, -40 dB)\u003c\/li\u003e\n\u003cli\u003eGround Lift (All per Channel)\u003c\/li\u003e\n\u003cli\u003eFrequency Response 10 Hz - 50 kHz +\/- 0.5 dB @ +4 dBu\u003c\/li\u003e\n\u003cli\u003ePower Requirements N\/A\u003c\/li\u003e\n\u003cli\u003eDimensions (HWD) 1.75 x 19 x 6\u003c\/li\u003e\n\u003cli\u003e4.4 cm x 48.3 cm x 15.2 cm\u003c\/li\u003e\n\u003cli\u003eWeight 6.5 lbs \/ 2.95 kg\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eShop the ART PDB4 and more ART Pro Audio gear at SixStarPSL.\u003c\/p\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":67676704637202,"sku":"PDB4","price":125.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0379\/2529\/0029\/files\/lg_PDB4-front-04.jpg?v=1794425852"},{"product_id":"art-av-direct-avdibox","title":"ART AV Direct, Multi Input Stereo Direct Box","description":"\u003ch2\u003eART AV Direct Multi Input Stereo Direct Box\u003c\/h2\u003e\u003cp\u003eMulti Input Direct Box With a comprehensive range of inputs, the AV Direct lets you connect virtually any analog audio source to a mixer or PA system without added noise or signal loss.\u003c\/p\u003e\u003cp\u003eThere are 1\/4\" TRS, 1\/8\" TRS, and stereo RCA inputs for line level sources, and both 1\/4\" TRS and pressure clip connectors for speaker level sources.\u003c\/p\u003e\u003cp\u003eTo reduce buzzes and hums, the front panel features a ground lift and high frequency filter, and the balanced XLR output is isolated by a transformer.\u003c\/p\u003e\u003cp\u003eThe passive circuitry doesn't require batteries or an external power supply, the metal enclosure provides durable protection, and the compact footprint fits easily into almost any space.\u003c\/p\u003e\u003cp\u003eWhether you need to connect a CD or DVD player, phono preamp, computer, or mobile device, the AV Direct will provide clear, powerful audio to your sound system.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1\/4\" TRS, 1\/8\" TRS, and Stereo RCA Line Level Inputs\u003c\/li\u003e\n\u003cli\u003e1\/4\" and Pressure Clip Speaker Level Inputs\u003c\/li\u003e\n\u003cli\u003eTransformer Isolated XLR Output\u003c\/li\u003e\n\u003cli\u003eLevel Control\u003c\/li\u003e\n\u003cli\u003e4.8 kHz High Frequency Filter\u003c\/li\u003e\n\u003cli\u003eGround Lift\u003c\/li\u003e\n\u003cli\u003e20 Hz - 20 kHz Frequency Response\u003c\/li\u003e\n\u003cli\u003ePassive Design, No Power Required\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eActive or Passive Passive\u003c\/li\u003e\n\u003cli\u003eInputs 1\/8\" TRS, 1\/4\" TRS, Stereo RCA (Line Level)\u003c\/li\u003e\n\u003cli\u003e1\/4\", Pressure Posts (Speaker Level)\u003c\/li\u003e\n\u003cli\u003eOutputs 1x XLR\u003c\/li\u003e\n\u003cli\u003eOutput Impedance 150Ω Nominal @ 1 kHz\u003c\/li\u003e\n\u003cli\u003eMaximum Input Level 100 W Rated @ 8Ω (Speaker)\u003c\/li\u003e\n\u003cli\u003eControls Level, Filter, Ground Lift\u003c\/li\u003e\n\u003cli\u003eFilter 4.8 kHz High Cut\u003c\/li\u003e\n\u003cli\u003eFrequency Response 20 Hz - 20 kHz (+\/- 1 dB)\u003c\/li\u003e\n\u003cli\u003eDimensions (HWD) 1.85″ x 4.6\" x 4.4\"\u003c\/li\u003e\n\u003cli\u003e4.7 cm x 11.7 cm x 11.2 cm\u003c\/li\u003e\n\u003cli\u003eWeight 1 lb \/ 460 g\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eShop the ART AV Direct and more ART Pro Audio gear at SixStarPSL.\u003c\/p\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":67676704669970,"sku":"AVDIBOX","price":95.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0379\/2529\/0029\/files\/lg_AV-direct-front.jpg?v=1794425855"},{"product_id":"art-pdb-pdb","title":"ART PDB, Passive Direct Box","description":"\u003ch2\u003eART PDB Passive Direct Box\u003c\/h2\u003e\u003cp\u003eThe PDB is a passive direct box for connecting unbalanced instrument, line, or speaker signals to balanced inputs.\u003c\/p\u003e\u003cp\u003eThe input signal is sent to a transformer isolated XLR output and a parallel Thru jack, so it can simultaneously be connected to an amplifier on stage.\u003c\/p\u003e\u003cp\u003eA switchable ground lift helps to eliminate hum, and switchable attenuation offers up to 40 dB of gain reduction.\u003c\/p\u003e\u003cp\u003eAs a fully passive design, the PDB doesn't require an external power source. Passive DIs are often a great match for powered sources such as synthesizers or guitars and basses with active preamps.\u003c\/p\u003e\u003cp\u003ePacked into a stage proof steel enclosure, the PDB provides a high fidelity connection to a mixer, PA system, or audio interface.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1\/4\" TRS Input and Thru Connectors\u003c\/li\u003e\n\u003cli\u003eBalanced XLR Output\u003c\/li\u003e\n\u003cli\u003eSwitchable Attenuation (-20 dB, -40 dB) and Ground Lift\u003c\/li\u003e\n\u003cli\u003ePassive Design, No Power Required\u003c\/li\u003e\n\u003cli\u003eRugged Steel Case\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eActive or Passive Passive\u003c\/li\u003e\n\u003cli\u003eInputs 1x 1\/4\" TRS\u003c\/li\u003e\n\u003cli\u003eOutputs 1x XLR\u003c\/li\u003e\n\u003cli\u003e1x 1\/4\" TRS Thru\u003c\/li\u003e\n\u003cli\u003eInput Impedance 50 kΩ\u003c\/li\u003e\n\u003cli\u003eOutput Impedance 600Ω\u003c\/li\u003e\n\u003cli\u003eControls Attenuator (0 dB, -20 dB, -40 dB)\u003c\/li\u003e\n\u003cli\u003eGround Lift\u003c\/li\u003e\n\u003cli\u003eFrequency Response 10 Hz - 50 kHz +\/- 0.5 dB @ +4 dBu\u003c\/li\u003e\n\u003cli\u003eDimensions (HWD) 3\" x 5\" x 2\"\u003c\/li\u003e\n\u003cli\u003e7.6 cm x 12.7 cm x 5.1 cm\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eShop the ART PDB and more ART Pro Audio gear at SixStarPSL.\u003c\/p\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":67676704702738,"sku":"PDB","price":49.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0379\/2529\/0029\/files\/lg_PDB-top.jpg?v=1794425855"},{"product_id":"art-dpdb-dpdb","title":"ART DPDB, 2 Channel Passive Direct Box","description":"\u003ch2\u003eART DPDB 2 Channel Passive Direct Box\u003c\/h2\u003e\u003cp\u003eThe dPDB is a two channel passive direct box for connecting unbalanced instrument, line, or speaker signals to balanced inputs.\u003c\/p\u003e\u003cp\u003eEach input signal is sent to a balanced, transformer isolated XLR output and a parallel Thru jack, so it can simultaneously be connected to an amplifier on stage. Both channels feature ground lift switches to help eliminate hum, and up to 40 dB of attenuation.\u003c\/p\u003e\u003cp\u003eAs a fully passive design, the dPDB doesn't require an external power source. Passive DIs are often a great match for powered sources such as synthesizers or guitars and basses with active preamps.\u003c\/p\u003e\u003cp\u003eThe dPDB provides a high fidelity connection to a mixer, PA system, or audio interface, and offers two independent channels in a stage proof steel enclosure.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2 Independent Channels\u003c\/li\u003e\n\u003cli\u003e1\/4\" TRS Inputs and Thru Connectors\u003c\/li\u003e\n\u003cli\u003eBalanced XLR Outputs\u003c\/li\u003e\n\u003cli\u003eSwitchable Attenuation (-20 dB, -40 dB) per Channel\u003c\/li\u003e\n\u003cli\u003eSwitchable Ground Lift per Channel\u003c\/li\u003e\n\u003cli\u003ePassive Design, No Power Required\u003c\/li\u003e\n\u003cli\u003eRugged Steel Case\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eActive or Passive Passive\u003c\/li\u003e\n\u003cli\u003eOutputs 600 Ω XLR Output Jack\u003c\/li\u003e\n\u003cli\u003eInput Impedance 50 kΩ\u003c\/li\u003e\n\u003cli\u003eOutput Impedance 600Ω\u003c\/li\u003e\n\u003cli\u003eFrequency Response 10 Hz , 100 kHz +\/- 0.5 dB @ +0 dBu\u003c\/li\u003e\n\u003cli\u003ePower Requirements\u003c\/li\u003e\n\u003cli\u003eDimensions (HWD) 5.75\" x 5\" x 2\"\u003c\/li\u003e\n\u003cli\u003e14.6 cm x 12.7 cm x 5.1 cm\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eShop the ART DPDB and more ART Pro Audio gear at SixStarPSL.\u003c\/p\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":67676704735506,"sku":"DPDB","price":59.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0379\/2529\/0029\/files\/lg_dPDB-Top-02.jpg?v=1794425863"},{"product_id":"art-dadb-dadb","title":"ART DADB, 2 Channel Active Direct Box","description":"\u003ch2\u003eART DADB 2 Channel Active Direct Box\u003c\/h2\u003e\u003cp\u003eThe dADB is a two channel active direct box for connecting instrument, line, or speaker signals to balanced inputs.\u003c\/p\u003e\u003cp\u003eThe high impedance 1\/4\" inputs are buffered and converted by extremely low noise electronics to deliver isolated, low impedance outputs. Thru jacks allow the input signal to be sent to an amplifier on stage as well as the XLR output . With an extremely flat, wide frequency response, the dADB is acoustically transparent, even at high input levels.\u003c\/p\u003e\u003cp\u003eBoth channels feature phase reversal, ground lifts to help reduce hum, low pass Bessel filters to eliminate high frequency interference, and up to 40 dB of attenuation.\u003c\/p\u003e\u003cp\u003eThe active circuitry can operate on phantom power or for over 100 hours on a new 9-volt battery. Active DIs are often a great match for sources like guitars and basses with passive pickups, or acoustic guitars with piezo pickups and no preamp.\u003c\/p\u003e\u003cp\u003eThe dADB provides a high fidelity connection to a mixer, PA system, or audio interface, and offers two independent channels with versatile features in a stage proof steel enclosure.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2 Independent Channels\u003c\/li\u003e\n\u003cli\u003e1\/4\" TRS Inputs and Thru Connections\u003c\/li\u003e\n\u003cli\u003eBalanced XLR Outputs\u003c\/li\u003e\n\u003cli\u003eSwitchable Attenuation (20 dB, 40 dB) per Channel\u003c\/li\u003e\n\u003cli\u003eSwitchable Phase Invert, Ground Lift, and Low Pass Filter per Channel\u003c\/li\u003e\n\u003cli\u003ePowered by 9-Volt Battery (100+ Hours) or Phantom Power\u003c\/li\u003e\n\u003cli\u003eRugged Steel Case\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eActive or Passive Active\u003c\/li\u003e\n\u003cli\u003eInputs 2x 1\/4\" TRS\u003c\/li\u003e\n\u003cli\u003eOutputs 2x XLR\u003c\/li\u003e\n\u003cli\u003e2x 1\/4\" TRS Thru\u003c\/li\u003e\n\u003cli\u003eInput Impedance 470 kΩ\u003c\/li\u003e\n\u003cli\u003eOutput Impedance \u0026lt;600Ω\u003c\/li\u003e\n\u003cli\u003eMaximum Input Level +4 dBu above Attenuation Setting\u003c\/li\u003e\n\u003cli\u003eMaximum Output Level '+6 dBu (Battery)\u003c\/li\u003e\n\u003cli\u003e+14 dBu (Phantom)\u003c\/li\u003e\n\u003cli\u003eControls Attenuator (0 dB, -20 dB, -40 dB)\u003c\/li\u003e\n\u003cli\u003ePhase Invert\u003c\/li\u003e\n\u003cli\u003eFilter\u003c\/li\u003e\n\u003cli\u003eGround Lift (All per Channel)\u003c\/li\u003e\n\u003cli\u003eFilter Low Pass Bessel Filters\u003c\/li\u003e\n\u003cli\u003eFrequency Response 10 Hz - 100 kHz +\/- 0.5 dB @ 0 dBu\u003c\/li\u003e\n\u003cli\u003eDynamic Range \u0026gt;100 dB (Typical)\u003c\/li\u003e\n\u003cli\u003eTotal Harmonic Distortion \u0026lt;.05% (Typical)\u003c\/li\u003e\n\u003cli\u003eChannel Separation \u0026gt;80 dB (Typical)\u003c\/li\u003e\n\u003cli\u003ePower Requirements 9V, 7.5 mA (Battery, Alkaline Recommended)\u003c\/li\u003e\n\u003cli\u003e18V - 48V DC, 6.4 mA (Phantom, per Channel)\u003c\/li\u003e\n\u003cli\u003eBattery Life 100+ Hours\u003c\/li\u003e\n\u003cli\u003eDimensions (HWD) 2″ x 5″ x 5.75″ 5.1\u003c\/li\u003e\n\u003cli\u003ecm x 12.7 cm x 14.6 cm\u003c\/li\u003e\n\u003cli\u003eWeight 2.7 lbs \/ 1.22 kg\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eShop the ART DADB and more ART Pro Audio gear at SixStarPSL.\u003c\/p\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":67676704768274,"sku":"DADB","price":89.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0379\/2529\/0029\/files\/lg_dadb_top.jpg?v=1794425864"},{"product_id":"art-xdirect-xdirect","title":"ART XDirect, Active Direct Box","description":"\u003ch2\u003eART XDirect Active Direct Box\u003c\/h2\u003e\u003cp\u003eThe XDirect is an active direct box for connecting unbalanced instrument, line, or speaker signals to balanced inputs.\u003c\/p\u003e\u003cp\u003eThe input signal is sent to a transformer isolated XLR output and a parallel Thru jack so it can simultaneously be connected to an amplifier on stage. Unique among ART DI boxes, XDirect models feature both 1\/4\" TRS and XLR inputs for expanded connectivity.\u003c\/p\u003e\u003cp\u003eSimple and durable, the XDirect is a compact DI in a rugged aluminum enclosure with a versatile feature set. Front panel switches engage up to 40 dB of attenuation to accommodate high level signals, and a low pass Bessel filter to eliminate high frequency interference. Rear switches activate a ground lift to reduce hum, and invert the signal polarity to resolve phase issues such as those which can occur when combining DI and mic sources.\u003c\/p\u003e\u003cp\u003eThe active circuitry can operate on phantom power or for over 250 hours on a new 9-volt battery. Active DIs are often a great match for sources like guitars and basses with passive pickups, or acoustic guitars with piezo pickups and no preamp.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1\/4\" TRS and XLR Inputs\u003c\/li\u003e\n\u003cli\u003e1\/4\" TRS Thru Connector\u003c\/li\u003e\n\u003cli\u003eTransformer Isolated Balanced XLR Output\u003c\/li\u003e\n\u003cli\u003eSwitchable Attenuation (0 dB, -20 dB, -40 dB)\u003c\/li\u003e\n\u003cli\u003eSwitchable Low Pass Filter, Ground Lift, and Phase Invert\u003c\/li\u003e\n\u003cli\u003ePowered by 9-Volt Battery (250+ Hours) or Phantom Power\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eInputs 1x XLR\u003c\/li\u003e\n\u003cli\u003e1x 1\/4\" TRS\u003c\/li\u003e\n\u003cli\u003eOutputs 1x XLR\u003c\/li\u003e\n\u003cli\u003e1x 1\/4\" TRS Thru\u003c\/li\u003e\n\u003cli\u003eInput Impedance 470 kΩ\u003c\/li\u003e\n\u003cli\u003eOutput Impedance \u0026lt;600Ω\u003c\/li\u003e\n\u003cli\u003eMaximum Input Level +4 dBu above Attenuation Setting\u003c\/li\u003e\n\u003cli\u003eMaximum Output Level +6 dBu (Battery)\u003c\/li\u003e\n\u003cli\u003e+14 dBu (Phantom)\u003c\/li\u003e\n\u003cli\u003eControls Attenuator (0 dB, -20 dB, -40 dB)\u003c\/li\u003e\n\u003cli\u003eFilter\u003c\/li\u003e\n\u003cli\u003eGround Lift\u003c\/li\u003e\n\u003cli\u003ePhase Invert\u003c\/li\u003e\n\u003cli\u003eFilter 30 kHz Low Pass\u003c\/li\u003e\n\u003cli\u003eFrequency Response 10 Hz - 100 kHz +\/- 5dB @ 0dBu\u003c\/li\u003e\n\u003cli\u003eDynamic Range \u0026gt;100 dB (Typical)\u003c\/li\u003e\n\u003cli\u003eTotal Harmonic Distortion \u0026lt;0.05% (Typical)\u003c\/li\u003e\n\u003cli\u003ePower Requirements 9V, 3.5 mA (Battery)\u003c\/li\u003e\n\u003cli\u003e18V - 48V (Phantom)\u003c\/li\u003e\n\u003cli\u003eBattery Life 250+ Hours\u003c\/li\u003e\n\u003cli\u003eDimensions (HWD) 1.75\" x 4.2\" x 3.5\"\u003c\/li\u003e\n\u003cli\u003e4.45 cm x 10.7 cm x 8.9 cm\u003c\/li\u003e\n\u003cli\u003eWeight 0.75 lbs \/ 340 g\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eShop the ART XDirect and more ART Pro Audio gear at SixStarPSL.\u003c\/p\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":67676704801042,"sku":"XDIRECT","price":74.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0379\/2529\/0029\/files\/lg_xdirect-front.jpg?v=1794425866"},{"product_id":"art-zdirect-zdirect","title":"ART ZDirect, Passive Direct Box","description":"\u003ch2\u003eART ZDirect Passive Direct Box\u003c\/h2\u003e\u003cp\u003eThe ZDirect is a passive direct box for connecting unbalanced instrument, line, or speaker signals to balanced inputs.\u003c\/p\u003e\u003cp\u003eThe input signal is sent to a transformer isolated XLR output and a parallel Thru jack, so it can simultaneously be connected to an amplifier on stage.\u003c\/p\u003e\u003cp\u003eSimple and durable, the ZDirect is a compact DI in a rugged aluminum enclosure with a versatile feature set. Front panel switches engage up to 40 dB of attenuation to accommodate high level signals, and a low pass Bessel filter to eliminate high frequency interference. Rear switches activate a ground lift to reduce hum and invert the signal polarity to resolve phase issues, such as those which can occur when combining DI and mic sources.\u003c\/p\u003e\u003cp\u003ePassive DIs are often a great match for powered sources such as synthesizers or guitars and basses with active preamps, and don't require an external power source.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1\/4\" TRS Input and Thru Connector\u003c\/li\u003e\n\u003cli\u003eBalanced XLR Output\u003c\/li\u003e\n\u003cli\u003eSwitchable Attenuation (0 dB, -20 dB, -40 dB) per Channel\u003c\/li\u003e\n\u003cli\u003eSwitchable Low Pass Filter, Ground Lift, and Phase Invert\u003c\/li\u003e\n\u003cli\u003ePassive Design, No Power Required\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eActive or Passive Passive\u003c\/li\u003e\n\u003cli\u003eInputs 1x 1\/4\" TRS\u003c\/li\u003e\n\u003cli\u003eOutputs 1x XLR\u003c\/li\u003e\n\u003cli\u003e1x 1\/4\" TRS Thru\u003c\/li\u003e\n\u003cli\u003eInput Impedance 50 kΩ\u003c\/li\u003e\n\u003cli\u003eOutput Impedance 600Ω\u003c\/li\u003e\n\u003cli\u003eControls Attenuator (0 dB, -20 dB, -40 dB)\u003c\/li\u003e\n\u003cli\u003eFilter\u003c\/li\u003e\n\u003cli\u003eGround Lift\u003c\/li\u003e\n\u003cli\u003ePhase Invert\u003c\/li\u003e\n\u003cli\u003eFilter 30 kHz Low Pass\u003c\/li\u003e\n\u003cli\u003eFrequency Response 10 Hz - 50 kHz +\/- 0.5 dB @ +4 dBu\u003c\/li\u003e\n\u003cli\u003eTotal Harmonic Distortion 0.01% Typical @ 1kHz, +18 dBu\u003c\/li\u003e\n\u003cli\u003eDimensions (HWD) 1.75\" x 4.2\" x 3.5\"\u003c\/li\u003e\n\u003cli\u003e4.45 cm x 10.7 cm x 8.9 cm\u003c\/li\u003e\n\u003cli\u003eWeight 0.75 lbs \/ 340 g\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eShop the ART ZDirect and more ART Pro Audio gear at SixStarPSL.\u003c\/p\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":67676704833810,"sku":"ZDIRECT","price":49.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0379\/2529\/0029\/files\/lg_zdirect-front.jpg?v=1794425868"},{"product_id":"art-dual-xdirect-dualxdirect","title":"ART Dual XDirect, 2 Channel Active Direct Box","description":"\u003ch2\u003eART Dual XDirect 2 Channel Active Direct Box\u003c\/h2\u003e\u003cp\u003eThe DualXDirect is a 2-channel active direct box for connecting unbalanced instrument, line, or speaker signals to balanced inputs.\u003c\/p\u003e\u003cp\u003eEach input signal is sent to a transformer isolated XLR output and a parallel Thru jack so it can simultaneously be connected to an amplifier on stage. Unique among ART DI boxes, XDirect models feature both 1\/4\" TRS and XLR inputs for expanded connectivity.\u003c\/p\u003e\u003cp\u003eFront panel switches engage 30 dB of attenuation to accommodate high level signals, and a ground lift to reduce hum.\u003c\/p\u003e\u003cp\u003eThe active circuitry can operate on phantom power or for over 100 hours on a new 9-volt battery. Active DIs are often a great match for sources like guitars and basses with passive pickups, or acoustic guitars with piezo pickups and no preamp.\u003c\/p\u003e\u003cp\u003eSimple and durable, the DualXDirect is a compact DI in a rugged aluminum enclosure with two independent channels and a streamlined feature set.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2 Independent Channels\u003c\/li\u003e\n\u003cli\u003e1\/4\" TRS \/ XLR Combo Inputs\u003c\/li\u003e\n\u003cli\u003e1\/4\" Thru Connectors\u003c\/li\u003e\n\u003cli\u003eBalanced XLR Outputs\u003c\/li\u003e\n\u003cli\u003eSwitchable 30dB Attenuation and Ground Lift per Channel\u003c\/li\u003e\n\u003cli\u003ePowered by 9-Volt Battery (100+ Hours) or Phantom Power\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eActive or Passive Active\u003c\/li\u003e\n\u003cli\u003eInputs 2x 1\/4\" TRS \/ XLR Combo Jacks\u003c\/li\u003e\n\u003cli\u003eOutputs 2x XLR\u003c\/li\u003e\n\u003cli\u003e2x 1\/4\" TRS Thru\u003c\/li\u003e\n\u003cli\u003eInput Impedance 470 kΩ\u003c\/li\u003e\n\u003cli\u003eOutput Impedance \u0026lt;600Ω\u003c\/li\u003e\n\u003cli\u003eMaximum Input Level +4 dBu above Attenuation Setting\u003c\/li\u003e\n\u003cli\u003eMaximum Output Level +6 dBu (Battery)\u003c\/li\u003e\n\u003cli\u003e+14 dBu (Phantom)\u003c\/li\u003e\n\u003cli\u003eControls Attenuator (0 dB, -30 dB)\u003c\/li\u003e\n\u003cli\u003eGround Lift (All per Chanel)\u003c\/li\u003e\n\u003cli\u003eFrequency Response 10 Hz - 100 kHz, +\/- 0.5 dB @ 0 dBu\u003c\/li\u003e\n\u003cli\u003eDynamic Range \u0026gt;100 dB (Typical)\u003c\/li\u003e\n\u003cli\u003eTotal Harmonic Distortion \u0026lt;.05% (Typical)\u003c\/li\u003e\n\u003cli\u003eChannel Separation \u0026gt;80 dB (Typical)\u003c\/li\u003e\n\u003cli\u003ePower Requirements 9V, 7.5 mA (Battery, Alkaline Recommended)\u003c\/li\u003e\n\u003cli\u003e18V - 48V, 6.5 mA (Phantom, per Channel)\u003c\/li\u003e\n\u003cli\u003eBattery Life 100+ Hours\u003c\/li\u003e\n\u003cli\u003eDimensions (HWD) 1.85\" x 4.6\" x 3.9\"\u003c\/li\u003e\n\u003cli\u003e4.7 cm x 11.7 cm x 9.9 cm\u003c\/li\u003e\n\u003cli\u003eWeight 0.84 lbs \/ 380 g\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eShop the ART Dual XDirect and more ART Pro Audio gear at SixStarPSL.\u003c\/p\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":67676704866578,"sku":"DUALXDIRECT","price":89.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0379\/2529\/0029\/files\/lg_Dual-X-Direct-front.jpg?v=1794425870"},{"product_id":"art-dual-zdirect-dualzdirect","title":"ART Dual ZDirect, 2 Channel Passive Direct Box","description":"\u003ch2\u003eART Dual ZDirect 2 Channel Passive Direct Box\u003c\/h2\u003e\u003cp\u003eThe DualZDirect is a 2-channel passive direct box for connecting unbalanced instrument, line, or speaker signals to balanced inputs.\u003c\/p\u003e\u003cp\u003eEach input signal is sent to a transformer isolated XLR output and a parallel Thru jack so it can simultaneously be connected to an amplifier on stage.\u003c\/p\u003e\u003cp\u003eFront panel switches engage up to 40 dB of attenuation to accommodate high level signals, and a low pass Bessel filter to eliminate high frequency interference. Rear switches activate a ground lift to reduce hum, and invert the signal polarity to resolve phase issues, such as those which can occur when combining DI and mic sources.\u003c\/p\u003e\u003cp\u003eAs a fully passive design, the PDB doesn't require an external power source. Passive DIs are often a great match for powered sources such as synthesizers or guitars and basses with active preamps.\u003c\/p\u003e\u003cp\u003eSimple and durable, the DualZDirect is a compact DI in a rugged aluminum enclosure with two indpendent channels and a versatile feature set.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2 Independent Channels\u003c\/li\u003e\n\u003cli\u003e1\/4\" TRS Inputs and Thru Connectors\u003c\/li\u003e\n\u003cli\u003eBalanced XLR Outputs\u003c\/li\u003e\n\u003cli\u003eSwitchable Attenuation (-20 dB, -40 dB) per Channel\u003c\/li\u003e\n\u003cli\u003eSwitchable Low Pass Filter, Ground Lift, and Phase Invert per Channel\u003c\/li\u003e\n\u003cli\u003ePassive Design, No Power Required\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eActive or Passive Passive\u003c\/li\u003e\n\u003cli\u003eInputs 2x 1\/4\" TRS\u003c\/li\u003e\n\u003cli\u003eOutputs 2x XLR\u003c\/li\u003e\n\u003cli\u003e2x 1\/4\" TRS Thru\u003c\/li\u003e\n\u003cli\u003eInput Impedance 50 kΩ\u003c\/li\u003e\n\u003cli\u003eOutput Impedance 600Ω\u003c\/li\u003e\n\u003cli\u003eControls Attenuator (0 dB, -20 dB, -40 dB)\u003c\/li\u003e\n\u003cli\u003eFilter\u003c\/li\u003e\n\u003cli\u003eGround Lift\u003c\/li\u003e\n\u003cli\u003ePhase Invert (All per Channel)\u003c\/li\u003e\n\u003cli\u003eFilter 30 kHz Low Pass\u003c\/li\u003e\n\u003cli\u003eFrequency Response 10 Hz - 50 kHz +\/- 0.5 dB @ +4 dBu\u003c\/li\u003e\n\u003cli\u003eTotal Harmonic Distortion .01% @ 1 kHz, +18 dBu (Typical)\u003c\/li\u003e\n\u003cli\u003e\u0026lt;.05% @ 100 Hz, +18 dBu\u003c\/li\u003e\n\u003cli\u003eChannel Separation \u0026gt;80 dB (Typical)\u003c\/li\u003e\n\u003cli\u003eDimensions (HWD) 1.85\" x 4.6\" x 3.9\", 4.7 cm x 11.7 cm x 9.9 cm\u003c\/li\u003e\n\u003cli\u003eWeight 0.88 lbs \/ 400 g\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eShop the ART Dual ZDirect and more ART Pro Audio gear at SixStarPSL.\u003c\/p\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":67676704932114,"sku":"DUALZDIRECT","price":55.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0379\/2529\/0029\/files\/lg_Dual-Z-Direct-front.jpg?v=1794425871"},{"product_id":"art-dual-rdb-dualrdb","title":"ART Dual RDB, 2 Channel Reamp Box and Direct Box","description":"\u003ch2\u003eART Dual RDB 2 Channel Reamp Box and Direct Box\u003c\/h2\u003e\u003cp\u003eThe Dual RDB converts line level signals to instrument level, so it's perfect for sending DI guitar or bass tracks from your DAW to an amplifier for re recording.\u003c\/p\u003e\u003cp\u003eThe dual channel design lets you route two independent performances simultaneously, or split one signal to both outputs and record through two amplifiers in a single pass for a layered sound. The Phase switch inverts the polarity of the second output for additional flexibility when combining amps.\u003c\/p\u003e\u003cp\u003eEach channel features 1\/4\" TRS and XLR connections for the inputs and outputs. Level controls on the front panel let you adjust the signal at the amplifier, rather than in the control room. This lets you quickly fine tune the gain to match the response of a guitar plugged directly into the amp.\u003c\/p\u003e\u003cp\u003eThe Dual RDB can also function as a stereo or dual direct box, and since it's a passive device, no external power supply is required.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2 Independent Channels\u003c\/li\u003e\n\u003cli\u003eDual 1\/4\" TRS and XLR Balanced Line Inputs with Level Controls\u003c\/li\u003e\n\u003cli\u003eTransformer Isolated XLR Balanced Mic Level Outputs\u003c\/li\u003e\n\u003cli\u003eTransformer Isolated 1\/4\" TRS Balanced Instrument Level Outputs\u003c\/li\u003e\n\u003cli\u003eChannel 2 Output Switchable between Channel 1 or 2 Input\u003c\/li\u003e\n\u003cli\u003eSwitchable Phase Invert on Channel 2\u003c\/li\u003e\n\u003cli\u003e20 Hz - 20 kHz Frequency Response\u003c\/li\u003e\n\u003cli\u003ePassive Design, No Power Required\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eActive or Passive Passive\u003c\/li\u003e\n\u003cli\u003eInputs 2x 1\/4\" TRS\u003c\/li\u003e\n\u003cli\u003e2x XLR\u003c\/li\u003e\n\u003cli\u003eOutputs 2x 1\/4\" TRS\u003c\/li\u003e\n\u003cli\u003e2x XLR\u003c\/li\u003e\n\u003cli\u003eControls Level (Per Channel)\u003c\/li\u003e\n\u003cli\u003eFrequency Response 20 Hz - 20 kHz +\/- 0.5 dB @ +4dBu\u003c\/li\u003e\n\u003cli\u003eTotal Harmonic Distortion .01% @ 1 kHz, +18 dBu\u003c\/li\u003e\n\u003cli\u003e\u0026lt;.05% @ 100 Hz, +18 dBu\u003c\/li\u003e\n\u003cli\u003eChannel Separation \u0026gt;80 dB (Typical)\u003c\/li\u003e\n\u003cli\u003eInsertion Loss -20 dB (100 kΩ Load)\u003c\/li\u003e\n\u003cli\u003e-25 dB (600Ω Load)\u003c\/li\u003e\n\u003cli\u003eDimensions (HWD) 1.85\" x 4.6\" x 3.9\"\u003c\/li\u003e\n\u003cli\u003e4.7 cm x 11.7 cm x 9.9 cm\u003c\/li\u003e\n\u003cli\u003eWeight 0.88 lbs \/ 400 g\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eShop the ART Dual RDB and more ART Pro Audio gear at SixStarPSL.\u003c\/p\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":67676704997650,"sku":"DUALRDB","price":99.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0379\/2529\/0029\/files\/lg_dual-rdb-front-02.jpg?v=1794425871"},{"product_id":"art-ps8-ii-ps8-ii","title":"ART PS8 II, 8 Outlet Power Sequencer","description":"\u003ch2\u003eART PS8 II 8 Outlet Power Sequencer\u003c\/h2\u003e\u003cp\u003eThe PS8-II is a power sequencer with variable delay.\u003c\/p\u003e\u003cp\u003eSome audio tools can produce momentary pops when turned on or off. A power sequencer prevents these spikes from reaching your speakers, and smoothes inrush current to protect sensitive equipment.\u003c\/p\u003e\u003cp\u003eThe eight rear AC outlets power up or down in order. The global Sequence Delay offsets each outlet by up to two seconds. Loud transients can't pass between units, and since your power amps can be the last to turn on and first to turn off, nothing reaches the speakers unless the entire system is ready.\u003c\/p\u003e\u003cp\u003eThe PS8-II is also a fully featured power conditioner that protects against surges and spikes, and provides EMI and RFI filtering. It also filters digital and dimmer hash, and any high frequency noise above the audio range. The custom filter design blocks virtually all unwanted signals between the AC line and ground.\u003c\/p\u003e\u003cp\u003eFor additional flexibility, a Euroblock connector provides remote switching of the power on and power off sequence, and there is an unswitched AC outlet on the front panel for convenient access.\u003c\/p\u003e\u003cp\u003eDesigned to protect your ears and your gear, the PS8-II is ideal for live venues, studios, fixed installations, conferencing, and high performance A\/V systems.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e8x Rear AC Outlets, 1 Unswitched Front Outlet\u003c\/li\u003e\n\u003cli\u003eUp to 2 Seconds of Sequence Delay\u003c\/li\u003e\n\u003cli\u003eSurge and Spike Protection\u003c\/li\u003e\n\u003cli\u003eEMI and RFI Filtering\u003c\/li\u003e\n\u003cli\u003eEuroblock Connector for Remote On \/ Off\u003c\/li\u003e\n\u003cli\u003e1U Rackmount\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePower Capacity 1800 W\u003c\/li\u003e\n\u003cli\u003eMaximum Load 15 Amps \/ 1800 W (@ 120 VAC)\u003c\/li\u003e\n\u003cli\u003eOutlets 8 x Rear Mounted Individually Sequenced Outlets\u003c\/li\u003e\n\u003cli\u003e1 x Front Mounted Unswitched\u003c\/li\u003e\n\u003cli\u003eDelay Time 0.5 to 2.0 Second Variable Pot\u003c\/li\u003e\n\u003cli\u003eRemote Switch On\/Off Function\u003c\/li\u003e\n\u003cli\u003eRemote Terminal Rear Mounted 4-pin Euro Block Connector\u003c\/li\u003e\n\u003cli\u003eLine Filtering RFI \/ EMI\u003c\/li\u003e\n\u003cli\u003ePower Requirements USA , 105 to 125 VAC \/ 60 Hz\u003c\/li\u003e\n\u003cli\u003eDimensions 1.75″ x 19.0″ x 11.5″ (16.5 cm x 48.2 cm x 29.2 cm)\u003c\/li\u003e\n\u003cli\u003eWeight 9.2 lbs \/ 4.2 kg\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eShop the ART PS8 II and more ART Pro Audio gear at SixStarPSL.\u003c\/p\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":67676705030418,"sku":"PS8-II","price":249.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0379\/2529\/0029\/files\/lg_PS8-II-font.jpg?v=1794425873"},{"product_id":"art-pds8u-pds8u","title":"ART PDS8U, 8 Outlet Power Strip with 2 USB Ports","description":"\u003ch2\u003eART PDS8U 8 Outlet Power Strip with 2 USB Ports\u003c\/h2\u003e\u003cp\u003eThe PDS8u is a touring grade power bar for stage, studio, and high performance A\/V applications.\u003c\/p\u003e\u003cp\u003eIts eight AC outlets are grouped in opposite orientations for easy access, with extra space around the two end outlets to accommodate large adapters. Two 5V USB ports are available to charge phones and mobile devices.\u003c\/p\u003e\u003cp\u003eIt features advanced EMI and RFI filtering to reduce noise, and a fast acting suppression circuit that responds to spikes and surges in less than a nanosecond to protect your equipment.\u003c\/p\u003e\u003cp\u003eIts rugged construction was designed for the demanding requirements of busy rental departments and backline companies. The metal enclosure is built for a lifetime of performance, and the heavy duty 20-foot cord brings the power you need anywhere you need it.\u003c\/p\u003e\u003cp\u003eYou might not spend a lot of time thinking about power bars. We built the PDS8u to be durable and dependable so that you dont have to.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e8x AC Outlets\u003c\/li\u003e\n\u003cli\u003e2x 5V USB Ports\u003c\/li\u003e\n\u003cli\u003eSurge \u0026amp; Overload Protection\u003c\/li\u003e\n\u003cli\u003eEMI and RFI Filtering\u003c\/li\u003e\n\u003cli\u003e20 Foot Cable\u003c\/li\u003e\n\u003cli\u003eRugged Metal Enclosure\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFeatures EMI \u0026amp; RFI Filtering20′ Cord\u003c\/li\u003e\n\u003cli\u003eOutputs 8x AC Outlets\u003c\/li\u003e\n\u003cli\u003e2x USB ports 5v\/3.1A\/(ovp\u0026amp;ocp)\u003c\/li\u003e\n\u003cli\u003eEnclosure All Steel Chassis\u003c\/li\u003e\n\u003cli\u003eDimensions 1.61″ x 3.39″ x 11.02″ (4.1 cm x 8.6 cm x 28.0 cm)\u003c\/li\u003e\n\u003cli\u003eWeight 2.65 lbs \/ 1.2 kg\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eShop the ART PDS8U and more ART Pro Audio gear at SixStarPSL.\u003c\/p\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":67676705063186,"sku":"PDS8U","price":99.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0379\/2529\/0029\/files\/lg_PD8SU-top.jpg?v=1794425877"},{"product_id":"art-iso-8u-iso-8u","title":"ART ISO-8U, Isolated Pedal Power Supply, 8 DC Outputs and USB","description":"\u003ch2\u003eART ISO-8U Isolated Pedal Power Supply, 8 DC Outputs and USB\u003c\/h2\u003e\u003cp\u003eThe ISO-8U is a compact pedalboard power supply with eight isolated DC outputs and a 10-watt USB port.\u003c\/p\u003e\u003cp\u003eSix outputs provide 100 mA, two provide 250 mA, and all have two selectable modes. Output 1 can deliver a fixed 9 volts or variable output down to 4 volts, for the \"low battery\" effect that can change the response of analog pedals. Try it with your favourite fuzz! The other outputs can switch between 9 and 12 volt operation for pedals that can accept higher voltage for increased headroom.\u003c\/p\u003e\u003cp\u003eIt comes with a variety of cables, including a battery clip, reverse polarity, and Y cable for connecting two outputs to a pedal that requires 18 or 24 volts.\u003c\/p\u003e\u003cp\u003eThe metal enclosure has recessed sides to protect controls and connections, and cable tie cutouts for neat and secure wiring.\u003c\/p\u003e\u003cp\u003eThe ISO-8 provides clean, noise free power and flexible features so you can get the best out of your favourite stompboxes.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e8x Isolated DC Outputs (6x 100 mA, 2x 250 mA)\u003c\/li\u003e\n\u003cli\u003e10-Watt USB Port\u003c\/li\u003e\n\u003cli\u003eOutput 1 Provides Fixed 9V or Variable 4V - 9V\u003c\/li\u003e\n\u003cli\u003eAll Other Outputs Switchable between 9V and 12V\u003c\/li\u003e\n\u003cli\u003eComes with 12 Cables Including Battery Clip, Polarity Reversal, and Y Adapter\u003c\/li\u003e\n\u003cli\u003eMetal Chassis with Tie Wrap Slots\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOutputs 8x 2.1mm x 5.1mm barrel connection, negative tip\u003c\/li\u003e\n\u003cli\u003e1x USB\u003c\/li\u003e\n\u003cli\u003eCables Provided\u003c\/li\u003e\n\u003cli\u003e6x 24\" 5.1mm to 5.1mm\u003c\/li\u003e\n\u003cli\u003e2x 24\" Rt. Angle 5.1mm to 5.1mm\u003c\/li\u003e\n\u003cli\u003e1x Battery clip to 5.1mm\u003c\/li\u003e\n\u003cli\u003e1x Polarity reverse 5.1mm to 5.1mm\u003c\/li\u003e\n\u003cli\u003e1x \"Y\" cable (5.1mm)\u003c\/li\u003e\n\u003cli\u003e1x 3.5mm to 5.1mm\u003c\/li\u003e\n\u003cli\u003ePower Requirements 85 - 240 VAC-50\/60 hz - 30 W universal power supply\u003c\/li\u003e\n\u003cli\u003eDimensions 1.33-\" x 6.8\" x 2.8\" (3.4 cm x 17.27 cm x 7.11 cm)\u003c\/li\u003e\n\u003cli\u003eWeight .61 lbs \/ .28 kg\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eShop the ART ISO-8U and more ART Pro Audio gear at SixStarPSL.\u003c\/p\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":67676705095954,"sku":"ISO-8U","price":149.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0379\/2529\/0029\/files\/lg_ISO8U-front.jpg?v=1794425877"},{"product_id":"art-rpc1-rpc1","title":"ART RPC1, Rack Power Conditioner with USB and RFI Filtering","description":"\u003ch2\u003eART RPC1 Rack Power Conditioner with USB and RFI Filtering\u003c\/h2\u003e\u003cp\u003eThe RPC 1 is a 1U rackmount power conditioner that provides essential protection for your equipment.\u003c\/p\u003e\u003cp\u003eThe rear panel has 8 AC outlets, including 4 with wide spacing for large power adapters. There's also an unswitched AC outlet on the front panel for convenient access, and quick charging USB A and USB C ports.\u003c\/p\u003e\u003cp\u003eThe RPC 1 protects against power surges and spikes, and offers RFI filtering for quiet, reliable performance.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1800-Watt Capacity with 15-Amp Circuit Breaker\u003c\/li\u003e\n\u003cli\u003e8 Rear AC Outlets (4 Wide Spaced)\u003c\/li\u003e\n\u003cli\u003e1 Front AC Outlet (Unswitched)\u003c\/li\u003e\n\u003cli\u003eUSB A \u0026amp; USB C Charging Ports\u003c\/li\u003e\n\u003cli\u003eSurge \u0026amp; Spike Protection\u003c\/li\u003e\n\u003cli\u003eRFI Filtering\u003c\/li\u003e\n\u003cli\u003eDetachable 5-Foot Power Cable\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePower Capacity: 1800 W\u003c\/li\u003e\n\u003cli\u003eCircuit Breaker: 15 A\u003c\/li\u003e\n\u003cli\u003eAC Outlets: 8 Rear\u003c\/li\u003e\n\u003cli\u003e1 Front (Unswitched)\u003c\/li\u003e\n\u003cli\u003eUSB: 1 USB A\u003c\/li\u003e\n\u003cli\u003e1 USB C\u003c\/li\u003e\n\u003cli\u003e5V\/3A, 20 W Max\u003c\/li\u003e\n\u003cli\u003eProtection: Surge, Spike\u003c\/li\u003e\n\u003cli\u003eFiltering: RFI\u003c\/li\u003e\n\u003cli\u003ePower Requirements: 120V~60Hz\u003c\/li\u003e\n\u003cli\u003eRear Mounted IEC Connector\u003c\/li\u003e\n\u003cli\u003eDimensions (HWD): 1.75\" x 19\" x 6\"\u003c\/li\u003e\n\u003cli\u003e4.45 cm x 48.3 cm x 15.2 cm\u003c\/li\u003e\n\u003cli\u003eWeight: 4.4 lbs \/ 2 kg\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eShop the ART RPC1 and more ART Pro Audio gear at SixStarPSL.\u003c\/p\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":67676705128722,"sku":"RPC1","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0379\/2529\/0029\/files\/lg_rpc1-front.png?v=1794425881"},{"product_id":"art-rpc2-rpc2","title":"ART RPC2, Rack Power Conditioner with USB and Digital Meters","description":"\u003ch2\u003eART RPC2 Rack Power Conditioner with USB and Digital Meters\u003c\/h2\u003e\u003cp\u003eThe RPC 2 is a 1U rackmount power conditioner that provides advanced protection for your equipment.\u003c\/p\u003e\u003cp\u003eThe rear panel has 8 AC outlets, including 4 with wide spacing for large power adapters. There's also an unswitched AC outlet on the front panel for convenient access, and quick charging USB A and USB C ports.\u003c\/p\u003e\u003cp\u003eThe RPC 2 protects against power surges and spikes, and offers RFI, EMI, common mode, and differential mode filtering. A large digital meter with a switchable backlight displays the input voltage and load current.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1800-Watt Capacity with 15-Amp Circuit Breaker\u003c\/li\u003e\n\u003cli\u003e8 Rear AC Outlets (4 Wide Spaced)\u003c\/li\u003e\n\u003cli\u003e1 Front AC Outlet (Unswitched)\u003c\/li\u003e\n\u003cli\u003eUSB A \u0026amp; USB C Charging Ports\u003c\/li\u003e\n\u003cli\u003eSurge \u0026amp; Spike Protection\u003c\/li\u003e\n\u003cli\u003eEMI, RFI, Common Mode \u0026amp; Differential Mode Filtering\u003c\/li\u003e\n\u003cli\u003eDigital Metering of Output Voltage \u0026amp; Current\u003c\/li\u003e\n\u003cli\u003eDetachable 5-Foot Power Cable\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePower Capacity: 1800 W\u003c\/li\u003e\n\u003cli\u003eCircuit Breaker: 15 A\u003c\/li\u003e\n\u003cli\u003eAC Outlets: 8 Rear\u003c\/li\u003e\n\u003cli\u003e1 Front (Unswitched)\u003c\/li\u003e\n\u003cli\u003eUSB: 1 USB A\u003c\/li\u003e\n\u003cli\u003e1 USB C\u003c\/li\u003e\n\u003cli\u003e5V\/3A, 20 W Max\u003c\/li\u003e\n\u003cli\u003eProtection: Surge, Spike\u003c\/li\u003e\n\u003cli\u003eFiltering: RFI\u003c\/li\u003e\n\u003cli\u003ePower Requirements: 120V~60Hz\u003c\/li\u003e\n\u003cli\u003eRear Mounted IEC Connector\u003c\/li\u003e\n\u003cli\u003eDimensions (HWD): 1.75\" x 19\" x 6\"\u003c\/li\u003e\n\u003cli\u003e4.45 cm x 48.3 cm x 15.2 cm\u003c\/li\u003e\n\u003cli\u003eWeight: 4.4 lbs \/ 2 kg\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eShop the ART RPC2 and more ART Pro Audio gear at SixStarPSL.\u003c\/p\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":67676705161490,"sku":"RPC2","price":149.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0379\/2529\/0029\/files\/lg_rpc2-front.png?v=1794425881"},{"product_id":"art-rpc3-rpc3","title":"ART RPC3, Rack Power Conditioner with USB, Digital Meters and LED Lamps","description":"\u003ch2\u003eART RPC3 Rack Power Conditioner with USB, Digital Meters and LED Lamps\u003c\/h2\u003e\u003cp\u003eThe RPC 3 is a 1U rackmount power conditioner that provides premium protection for your equipment, because a great sound source deserves a great power source.\u003c\/p\u003e\u003cp\u003eThe rear panel has 8 AC outlets, including 4 with wide spacing for large power adapters. The front panel features an unswitched AC outlet, quick charging USB A and USB C ports, and pull out LED lamps with a dimmer and switch.\u003c\/p\u003e\u003cp\u003eThe RPC 3 protects against power surges, spikes, overvoltage, and undervoltage. It also offers RFI, EMI, common mode, and differential mode filtering, and the rear outlets are grouped into 2 isolated banks.\u003c\/p\u003e\u003cp\u003eA large digital meter with a switchable backlight displays the input voltage and load current.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1800-Watt Capacity with 15-Amp Circuit Breaker\u003c\/li\u003e\n\u003cli\u003e8 Rear AC Outlets (4 Wide Spaced) in 2 Isolated Banks\u003c\/li\u003e\n\u003cli\u003e1 Front AC Outlet (Unswitched)\u003c\/li\u003e\n\u003cli\u003eUSB A \u0026amp; USB C Charging Ports\u003c\/li\u003e\n\u003cli\u003eSurge, Spike, Overvoltage \u0026amp; Undervoltage Protection\u003c\/li\u003e\n\u003cli\u003e2-Way EMI, RFI, Common Mode \u0026amp; Differential Mode Filtering\u003c\/li\u003e\n\u003cli\u003eDigital Metering of Output Voltage \u0026amp; Current\u003c\/li\u003e\n\u003cli\u003e2 Pullout LED Lamps with Switch \u0026amp; Dimmer\u003c\/li\u003e\n\u003cli\u003eDetachable 5-Foot Power Cable\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePower Capacity: 1800 W\u003c\/li\u003e\n\u003cli\u003eCircuit Breaker: 15 A\u003c\/li\u003e\n\u003cli\u003eAC Outlets: 8 Rear\u003c\/li\u003e\n\u003cli\u003e1 Front (Unswitched)\u003c\/li\u003e\n\u003cli\u003eUSB: 1 USB A\u003c\/li\u003e\n\u003cli\u003e1 USB C\u003c\/li\u003e\n\u003cli\u003e5V\/3A, 20 W Max\u003c\/li\u003e\n\u003cli\u003eProtection: Surge, Spike\u003c\/li\u003e\n\u003cli\u003eFiltering: RFI\u003c\/li\u003e\n\u003cli\u003ePower Requirements: 120V~60Hz\u003c\/li\u003e\n\u003cli\u003eRear Mounted IEC Connector\u003c\/li\u003e\n\u003cli\u003eDimensions (HWD): 1.75\" x 19\" x 6\"\u003c\/li\u003e\n\u003cli\u003e4.45 cm x 48.3 cm x 15.2 cm\u003c\/li\u003e\n\u003cli\u003eWeight: 4.4 lbs \/ 2 kg\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eShop the ART RPC3 and more ART Pro Audio gear at SixStarPSL.\u003c\/p\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":67676705194258,"sku":"RPC3","price":229.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0379\/2529\/0029\/files\/lg_rpc3-front.png?v=1794425884"},{"product_id":"art-s8-arts8","title":"ART S8, 8 Channel 2 Way Mic Splitter, 1U","description":"\u003ch2\u003eART S8 8 Channel 2 Way Mic Splitter, 1U\u003c\/h2\u003e\u003cp\u003eThe S8 lets your signals be in two places at once.\u003c\/p\u003e\u003cp\u003eIt's an 8-channel splitter in a 1U rackmount enclosure, with one direct output and one transformer isolated output per channel. The passive design doesn't require power, but the direct outputs will pass phantom power for use with active microphones. Each channel also features a switchable ground lift on every channel to reduce noise due to ground loops, and an input pad to accommodate line level sources.\u003c\/p\u003e\u003cp\u003eWhen two outputs are better than one, use the S8 to connect to both the front of house and monitor mixers, for creative parallel processing, or to record safety tracks at lower levels in case of clipping.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e8-Channel 2-Way Splitter\u003c\/li\u003e\n\u003cli\u003eBalanced XLR Connections\u003c\/li\u003e\n\u003cli\u003e1x Direct and 1x Transformer Isolated Output per Channel\u003c\/li\u003e\n\u003cli\u003eDirect Outputs Pass Phantom Power\u003c\/li\u003e\n\u003cli\u003eSwitchable Ground Lift and Input Pad per Channel\u003c\/li\u003e\n\u003cli\u003ePassive Design, No Power Required\u003c\/li\u003e\n\u003cli\u003e1U Rackmount\u003c\/li\u003e\n\u003cli\u003eReversible Rack Ears\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eInput Impedance \u0026gt; 1.1 kΩ @ 1 kHz\u003c\/li\u003e\n\u003cli\u003eTypical Driving Source Impedance is 150Ω\u003c\/li\u003e\n\u003cli\u003eOutput Impedance \u0026lt; 255Ω @ 1 kHz\u003c\/li\u003e\n\u003cli\u003e1 kΩ Typical Output Load Impedance\u003c\/li\u003e\n\u003cli\u003eFrequency Response 20 Hz - 20 kHz (+\/- 0.25 dB @ -15 dBu)\u003c\/li\u003e\n\u003cli\u003eTHD \u0026lt; 0.26% (20 Hz - 20 kHz, -15 dBu Input)\u003c\/li\u003e\n\u003cli\u003e\u0026lt; 0.1% (45 Hz - 20 kHz, -15 dBu Input)\u003c\/li\u003e\n\u003cli\u003e0.002% Typical @ 1 kHz (-15 dBu Input)\u003c\/li\u003e\n\u003cli\u003eCMRR \u0026gt; 105 dB @ 60 Hz\u003c\/li\u003e\n\u003cli\u003e\u0026gt; 80 dB @ 3 kHz\u003c\/li\u003e\n\u003cli\u003ePhase Shift \u0026lt;10° @ 20 kHz (Reference 1 kHz)\u003c\/li\u003e\n\u003cli\u003eInsertion Loss ~2 dB @ 1 kHz\u003c\/li\u003e\n\u003cli\u003eDimensions (DWH) 3.75\" x 19\" x 1.75\"\u003c\/li\u003e\n\u003cli\u003e95 mm x 483 mm x 44 mm\u003c\/li\u003e\n\u003cli\u003eWeight 3.75 lbs \/ 1.7 kg\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eShop the ART S8 and more ART Pro Audio gear at SixStarPSL.\u003c\/p\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":67676705227026,"sku":"ARTS8","price":345.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0379\/2529\/0029\/files\/lg_S8-front.jpg?v=1794425884"},{"product_id":"art-s8-3way-arts8-3way","title":"ART S8 3Way, 8 Channel 3 Way Mic Splitter, 1U","description":"\u003ch2\u003eART S8 3Way 8 Channel 3 Way Mic Splitter, 1U\u003c\/h2\u003e\u003cp\u003eThe S8-3Way lets your mic signals be in three places at once.\u003c\/p\u003e\u003cp\u003eIt's an 8-channel splitter in a 1U rackmount enclosure with one direct output and two transformer isolated outputs per channel. The passive design doesn't require power, but the direct outputs will pass phantom power for use with active microphones.\u003c\/p\u003e\u003cp\u003eWhen three outputs are better than one, the S8-3Way is ideal for sending signals to multiple destinations, such as front of house, monitor, and broadcast or recording mixers.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e8-Channel 3-Way Splitter\u003c\/li\u003e\n\u003cli\u003eBalanced XLR Connections\u003c\/li\u003e\n\u003cli\u003e1x Direct and 2x Transformer Isolated Outputs per Channel\u003c\/li\u003e\n\u003cli\u003eDirect Outputs Pass Phantom Power\u003c\/li\u003e\n\u003cli\u003ePassive Design, No Power Required\u003c\/li\u003e\n\u003cli\u003e1U Rackmount\u003c\/li\u003e\n\u003cli\u003eReversible Rack Ears\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eInput Impedance \u0026gt; 1.1 kΩ @ 1 kHz\u003c\/li\u003e\n\u003cli\u003eTypical Driving Source Impedance is 150Ω\u003c\/li\u003e\n\u003cli\u003eOutput Impedance \u0026lt; 255Ω @ 1 kHz\u003c\/li\u003e\n\u003cli\u003e1 kΩ Typical Output Load Impedance\u003c\/li\u003e\n\u003cli\u003eFrequency Response 20 Hz - 20 kHz (+\/- 0.25 dB @ -15 dBu)\u003c\/li\u003e\n\u003cli\u003eTHD \u0026lt; 0.26% (20 Hz - 20 kHz, -15 dBu Input)\u003c\/li\u003e\n\u003cli\u003e\u0026lt; 0.1% (45 Hz - 20 kHz, -15 dBu Input)\u003c\/li\u003e\n\u003cli\u003e0.002% Typical @ 1 kHz (-15 dBu Input)\u003c\/li\u003e\n\u003cli\u003eCMRR \u0026gt; 105 dB @ 60 Hz\u003c\/li\u003e\n\u003cli\u003e\u0026gt; 80 dB @ 3 kHz\u003c\/li\u003e\n\u003cli\u003ePhase Shift \u0026lt;10° @ 20 kHz (Reference 1 kHz)\u003c\/li\u003e\n\u003cli\u003eInsertion Loss ~2 dB @ 1 kHz\u003c\/li\u003e\n\u003cli\u003eDimensions (DWH) 3.75\" x 19\" x 1.75\"\u003c\/li\u003e\n\u003cli\u003e95 mm x 483 mm x 44 mm\u003c\/li\u003e\n\u003cli\u003eWeight 3.75 lbs \/ 1.7 kg\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eShop the ART S8 3Way and more ART Pro Audio gear at SixStarPSL.\u003c\/p\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":67676705259794,"sku":"ARTS8-3WAY","price":369.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0379\/2529\/0029\/files\/lg_S8-3way-front.jpg?v=1794425889"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0379\/2529\/0029\/collections\/art-applied-research-technology-logo.png?v=1794425573","url":"https:\/\/sixstarpsl.com\/collections\/art.oembed","provider":"SixStarPSL","version":"1.0","type":"link"}