The Maxi 2.0 IP is the brightest and most powerful light we’ve ever made. With at least 2x the brightness of the previous generation Maxi, the Maxi 2.0 features brand new AmberWhite LED technology that allows color for reproduction that was never possible before. With 29 built-in color presets designed specifically for the event industry by industry professionals, Maxi 2.0 allows the user to create incredible lighting designs with just the push of a button. Crafted in Germany with a careful balance of totally reengineered optics merged with the warmth of the AmberWhite LED technology, the Maxi 2.0 is the perfect fixture for uplighting, ambient lighting, dance floor lighting, stage lighting, and beyond.

• 3x 15 Watt RGBaW with AmberWhite LED technology, 45 Watts
• Single Color LUX as high as 12,370 @1 m (see table below)
• Refreshed optics for optimal brightness without sacrificing battery life
• Variable beam angle. Standard with 15°. Available optics: 10°, 15°, 25° & 45°
• More than 2x brightness of previous generation original Maxi
• 14 hours of rechargeable battery life (all colors on, full power)
• Solid-state, fanless operation
• 29 carefully curated color presets designed for weddings & events
• IP65 rated for indoor or outdoor use
• Scratch-resistant housing and acrylic glass surface
• Available in anthracite gray or creme
• Freestanding or mountable using the included bracket
• Available in a non-battery-powered, wired version for permanent installations
• PWM (LED refresh rate) adjustable via smartphone app (500 Hz to 4000 Hz)
• Compatible with a smartphone app via Connect Hardware
• 100% designed, engineered & hand-assembled in Germany

Control / Operation:

Ape Labs is known to "Keep it Simple" when it comes to controlling lights. A beginner with no instructions can typically operate an Ape Labs fixture within seconds of picking up an ApeRemote or opening the app. But its simplicity does not lack in features. Two of the most famous features are "Grouping" and "MusikMode".

Grouping allows the user to create DMX-Like shows on the fly by grouping any number of mixed & matched Ape Labs SKUs into up to four groups. The user is then able to control groups individually or universally.

MusikMode will automatically create a music-based light show with the press of a button. It uses proprietary technology that analyzes the sound in the room and the total number of Ape Labs fixtures to build a constantly evolving light show. Just don't call it "Sound Active".

• Wireless DMX: 4, 7, or 8 Channel Modes (W-App / Connect required, 3900 ft range)
• Wireless KNX (W-App / Connect required, 3900 ft range)
• Wireless Android / iOS App (W-App / Connect required, 3900 ft range)
• Wireless remote control (ApeRemote required, 200 ft range)
• Wireless range increases as more fixtures are added since all lights repeat the signal
• Pairing is possible with ApeRemotes or W-App/Connects to increase the number of groups or universes in the room
• W-App/Connect will save settings and programs to the cloud for cross-device operations or community sharing
• Free software/firmware updates via W-App or Connect

Specs:

• Battery type in lamp Ni-MH 54 Wh
• Made from stainless steel
• Color cream white or anthracite gray
• Wavelength red = 622.5 nm
• Wavelength green = 522.5 nm
• Wavelength blue = 457.5 nm
• AmberWhite color temperature = 2700 K
• Color rendering in CRI (Ra) = 90
• PWM (Pulse Width Modulation) = 500 Hz – 4000 Hz
• Flicker-free = Yes
• Dimmable = Yes
• Total lamp luminous flux = 1635 lm

Photometric Data:

When comparing Ape Labs LUX values to competitor values, make sure to look at single color ratings. If only a single LUX value is given for a fixture, it's most likely an "All On" rating. This means that every color is combined when rating.

The Ape Labs Maxi 2.0 IP comes standard with 15° optics, but three alternative optics are available. Below are the LUX ratings for each color, with each beam angle, at both 1m and 2m distances.

• Dimensions Maxi 2.0: 13.7x13.7x6.5cm / 5.4x5.4x2.6in 
• Weight Maxi 2.0: 1.7 kg / 3.7 lbs