Lowell LUH-15TA

Save $34.31
LowellSKU: LUH-15TA

Price:
$251.61 $285.92

Shipping calculated at checkout

Description

 

LUH-15TA: Unihorn™ for General Signaling

 
For paging and general voice communications (25V, 70V, 100V, 8ohm). The ready-to-install paging re-entrant horn with weather-resistant housing is engineered for versatile labor-saving installation in brick, concrete block, plaster, drywall, or acoustic tile—indoors or outdoors—recessed or surface-mount—new or retrofit applications.
 

PERFORMANCE

  • Paging, general signaling

ASSEMBLY INCLUDES

  • 15W driver
  • Screwdriver-adjustable transformer (25V/70V/100V) plus 8ohm bypass input
  • Aluminum housing with moisture-seal cover. Simple two-wire hook-up to the pigtail or through waterproof gland-type cable fitting (see instruction sheet).
  • Fine perforation, press-fit aluminum grille fits snugly for a hardware-free appearance, while helping to protect the front of horn from nesting birds and insects.
  • Trim ring
  • Network Grey finish
  • Average Sensitivity 105dB (1W/1M)
  • For retrofit applications, this model will accept an EIA standard grille for 8 in. speaker and the UL Listing will remain valid.

COMPLIANCE & CERTIFICATION

  • UL1480A general signaling (USA)
  • UL2043 suitable for use in return air plenum space (USA)
  • CSA C22.2 No. 205-12 general signaling (Canada)

A&E SPECIFICATIONS

  • The paging re-entrant horn shall be Lowell Model LUH-15TA, which shall include a self-contained compression driver in aluminum weather-resistant housing that can be installed in 4 inch deep spaces. Power rating shall be 15 watts continuous. Frequency response shall be 740Hz–7.4kHz (±6dB). Sound pressure level shall be 105dB (1W1M) average, 116.8dB SPL (max) 15W/1M calculation based on power rating and measured sensitivity. Dispersion shall be 80 degrees conical @2000Hz (-6dB). Unit shall include a 100/70/25V transformer with taps selectable on front and rear of horn, and includes an 8ohm transformer bypass input. The horn will ship ready for standard two-wire connection with cable exiting through a rear waterproof gland-type connector. Housing shall be 7.1 in. diameter at its widest measure with an 8 in. diameter flat face. The assembly shall include an aluminum trim ring/grille (9.6 in. diameter) and have no visible hardware and neutral grey finish. The assembly shall mount using three screwdriver-activated clamps that are adjustable for depths of 0 to 1.5 in. (factory setting) or 1 to 2.125 in. (when dog ear clamps are reversed), or it can be mounted using screws (not included).

Synchrony Financial

Progressive Leasing

Payment & Security

Payment methods

Amazon American Express Apple Pay Diners Club Discover Google Pay Mastercard PayPal Shop Pay Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.


Security

Estimate shipping

You may also like

Recently viewed